Remapping

[jamie16v]

i understand completely 

[Chris.]

Certainly interesting to get into if you have the relevant documentation to read through and understand how the ECU works.  I can only mind Me7.1 documentation from bosch and nothing for ME3.8

Only thing is...you will need to find someone to give you a stock AGU map file as you cant read from the AGU 3.8 ecu

[jamie16v]

you have pm 

[jamie16v]

how would one get a 12v supply to pin 43? would it just be a case of splicing into the loom?...

[The Doc]

how would one get a 12v supply to pin 43? would it just be a case of splicing into the loom?...

You'd goto the ecu connector, this may end in tears btw.....

WinOLS.

WinOLS what?

[jamie16v]

how would one get a 12v supply to pin 43? would it just be a case of splicing into the loom?...

You'd goto the ecu connector, this may end in tears btw.....

howcome?....
 i was thinking..i might have a play on my scenic first.. 
its easier to tap into the ecu and has no boost 

[Chris.]

I had a look at a A3 1.8T map I found online last night.....Without map packs in WINOLS.....you might aswell just be looking at squiggly lines lol

[dom]

how would one get a 12v supply to pin 43? would it just be a case of splicing into the loom?...

You'd goto the ecu connector, this may end in tears btw.....

Awaits the 'Help I've blown my ECU' thread....

[jamie16v]

how would one get a 12v supply to pin 43? would it just be a case of splicing into the loom?...

You'd goto the ecu connector, this may end in tears btw.....

Awaits the 'Help I've blown my ECU' thread....

i am not going to even attempt it without all the relevent information. i dont really want to map my car, i just want to learn a little about tuning. at this stage i would leave it to the proffesionals. 

[jamie16v]

apparently, jumpering pins in the obd port can get you there.  best leave it as that though.. :embarassed: