calibra injectors and vr6 maf before map?

[jamie16v]

o.k... i have had a custom stage 2 by yourself..
i have trial fitted the injectors  i will fit my old injector back for now then.. i will have to fit the maf with a reducer i think and just stick a cone filter onto the maf or fab something up to move the intake to somewhere cooler..

[RTechUK]

o.k... i have had a custom stage 2 by yourself..
i have trial fitted the injectors  i will fit my old injector back for now then.. i will have to fit the maf with a reducer i think and just stick a cone filter onto the maf or fab something up to move the intake to somewhere cooler..

The 16x16 map will have major changes to get the stock injectors to fuel for the stage2 setup, I am is sure you will get overfuel.

I am having a air box for a cone filter being made at the moment, It will be spot on for the vr6 maf..

Nick

[blade4real2004]

yo nick i got pauls k04 001 (6 months old) now and i got my forge actuator which i was going to put on my k03s should i put it on the k04?

i got his new 255l pump and the 380cc injectors and my vr6 maf im not going to bother with the water meth as i dont drive hard to justify it am i still good for 300lbs torque? im prob looking at coming up after christmas now soon as i know im good with the actuator ill get the k04 on mine

[jamie16v]

I am having a air box for a cone filter being made at the moment, It will be spot on for the vr6 maf..

Nick

is that all inclusive with the map  haha, just kidding, i am kind of sorting my own franken-coldfeed at the moment.. you`ll probably laugh when you see it but i like to do things different. i dont like to buy off the shelf in cheque book stylee but i like to blue peter things myself. the point is it will work, just like my N75 feed did 

[jamie16v]

an old thread but still under the same topic but...
how long should this take to custom map roughly?. 
vr6 maf/C20LET injectors but with hybrid k03 housing/k04 internals and forge actuator fitted too..