Author Topic: k&n panel filter  (Read 9590 times)

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: k&n panel filter
« Reply #30 on: 16 October 2011, 22:03 »
its not a oil ,its a spray ,ill find link . :rolleyes: god i wouldnt trust foam ,cant even keep my pond clear.Greens better than k&n ,you just paying for the name. Green makes better filters were they silicon the rubber to the cotton it dont soak into the cotton and restrict it that tiny bit. :wink:

Are you for real? Pipercross make filters for a range of manufactures, the special foam is MORE than up to the job.

Do you really think they would / could sell a product that doesn't do what it is supposed to? Its a filter it stops crap from getting past it end off.

I have run one for over 5 years and thousands of miles  :smiley:
i know but k&n will stop more crap,i always get cotton filters
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline richw911

  • 10k hero
  • *
  • Posts: 18,673
  • The Linkmeister and an OEM Freak.
Re: k&n panel filter
« Reply #31 on: 16 October 2011, 22:05 »
wow they do a cleaner ,the other spray stops dust ,its not oil .I used to use it few years back but i could never find a cleaner. http://www.ebay.co.uk/itm/Pipercross-Panel-Air-Filter-Cleaning-Kit-Cleaner-/330499462592?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4cf34d95c0
As you say its not oil  :smiley:

That is not needed you just wash them  :wink:

MKIV Mod Squad™ a part of the headlight police.

Offline richw911

  • 10k hero
  • *
  • Posts: 18,673
  • The Linkmeister and an OEM Freak.
Re: k&n panel filter
« Reply #32 on: 16 October 2011, 22:06 »
its not a oil ,its a spray ,ill find link . :rolleyes: god i wouldnt trust foam ,cant even keep my pond clear.Greens better than k&n ,you just paying for the name. Green makes better filters were they silicon the rubber to the cotton it dont soak into the cotton and restrict it that tiny bit. :wink:

Are you for real? Pipercross make filters for a range of manufactures, the special foam is MORE than up to the job.

Do you really think they would / could sell a product that doesn't do what it is supposed to? Its a filter it stops crap from getting past it end off.

I have run one for over 5 years and thousands of miles  :smiley:
i know but k&n will stop more crap,i always get cotton filters

How will a k and N stop more crap?

MKIV Mod Squad™ a part of the headlight police.

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: k&n panel filter
« Reply #33 on: 16 October 2011, 22:24 »
The factory airbox and piping with no filter yielded a pressure drop of 5.0 inches of water or 0.18 psi. That means that the worst filter in this test only caused a pressure drop of 0.07 psi. In my opinion, this means that if you are picking an air filter based on performance, you probably aren't doing your car any favors. For the record, the K&N was the best flowing filter. Of the 3 types of media tested, the cotton gauze type filters flow best. :wink: http://www.bobistheoilguy.com/airfilter/airtest1.htm  use what you want but cotton beats foam. :smiley:
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline james2

  • I live here
  • *****
  • Posts: 1,878
  • No scammers please.
Re: k&n panel filter
« Reply #34 on: 16 October 2011, 22:31 »
fail:That said, both the cotton gauze type (K&N) and foam filters showed the same levels of filtration. Both performed poorly compared to the fiberous or paper filters (Napa, Baldwin, and Mazda). :smiley:
AGU 1.8T. Mods done: R32 front bumper, turborev smic, ngk platinum spark plugs, uprated pancake pipe, demon motorsport boost hoses, forge 007 dv, forge engine cover, r-tec stage 1 map ,home made cold airfilter ,run on 98 ron fuel and castrol edge 0w 40 oil. Advanti racing alloys.

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: k&n panel filter
« Reply #35 on: 16 October 2011, 23:22 »
The factory airbox and piping with no filter yielded a pressure drop of 5.0 inches of water or 0.18 psi. That means that the worst filter in this test only caused a pressure drop of 0.07 psi. In my opinion, this means that if you are picking an air filter based on performance, you probably aren't doing your car any favors. For the record, the K&N was the best flowing filter. Of the 3 types of media tested, the cotton gauze type filters flow best. :wink: http://www.bobistheoilguy.com/airfilter/airtest1.htm  use what you want but cotton beats foam. :smiley:

Do you work for K & N  :huh:

I will say it again it is not the best choice for any 1.8t.  :smiley:

jamie16v

  • Guest
Re: k&n panel filter
« Reply #36 on: 16 October 2011, 23:33 »
oh, not another one... :cry:

Offline richw911

  • 10k hero
  • *
  • Posts: 18,673
  • The Linkmeister and an OEM Freak.
Re: k&n panel filter
« Reply #37 on: 17 October 2011, 17:41 »
 :lipsrsealed:

MKIV Mod Squad™ a part of the headlight police.

Offline Stokie Mac

  • GTI forum regular
  • ***
  • Posts: 179
Re: k&n panel filter
« Reply #38 on: 17 October 2011, 18:59 »
Whats the Best one to go for then Pipercross or Green??..
Green seem Alot More Expensive than Pipercross so does that make then Superior??..

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: k&n panel filter
« Reply #39 on: 17 October 2011, 19:23 »
Whats the Best one to go for then Pipercross or Green??..
Green seem Alot More Expensive than Pipercross so does that make then Superior??..

Nope pipercross is the best choice  :smiley: