Author Topic: Hello from Aberdeen - Fabia vRS/Bora 4mo S3  (Read 3879 times)

Offline Yohan

  • Here all the time
  • ****
  • Posts: 269
Hello from Aberdeen - Fabia vRS/Bora 4mo S3
« on: 08 September 2011, 12:06 »
Hello all,

I haven't really created a proper introduction thread for myself so here's my attempt to change that  :smiley:

Up until recently I owned a Skoda Fabia vRS which is quite possibly the best car I've had the pleasure of owning. It's cheap to tax, cheap to insure, cheap to run, and nothing goes wrong with it!





In standard form they are quite nippy having the PD130 engines and certainly torquey and before I started modifying it further I wanted to get a benchmark.



To cut a long story short, it's had a whole load of modifications fitted including a hybrid turbo and then a custom map by R-Tech.



After over 2 years of ownership I felt it was time for a change and had the urge to go back to something petrol powered which ended up with me owning this.





While the V6 engine was great (epic sound), it was just far too slow and thirsty for me so it was time for a change.

Part of the reason I bought the V6 model was for the benefit for the 4motion system which I could've used several winters ago.

So with the help of some friends and the information available on forums, the V6 was replaced with a 1.8T AMK from an S3 that had only covered 26,400 miles before some gimp flipped it on it's head  :grin:



Unfortunately this picture is quite out of date but it shows the car more or less at it stands just now.



The modification list is extensive, everything has been replaced, and it has just about every bolt on a 1.8T can have with the exception of new manifolds, turbo and so on.

The car is currently down at R-Tech getting a custom stage 2 map to help lug the Bora's fat ass around  :grin:

So no I don't own a GTI (and never have) but hopefully I can still make myself useful around here :smiley:

Thanks,

John
« Last Edit: 08 September 2011, 12:08 by Yohan »

Offline Rhyso

  • Global Moderator
  • Sir Postalot
  • *****
  • Posts: 26,720
Re: Hello from Aberdeen - Fabia vRS/Bora 4mo S3
« Reply #1 on: 08 September 2011, 14:45 »
Welcome John :afro: 

Offline barrym381

  • Forum addict
  • *
  • Posts: 5,934
Re: Hello from Aberdeen - Fabia vRS/Bora 4mo S3
« Reply #2 on: 08 September 2011, 22:05 »
hi there mate was thinking of doing the same to my golf could you post some figures when u get it back,thanks

Offline Yohan

  • Here all the time
  • ****
  • Posts: 269
Re: Hello from Aberdeen - Fabia vRS/Bora 4mo S3
« Reply #3 on: 09 September 2011, 08:37 »
Thanks chaps  :smiley:

Yeah I'll post all graphs upon completion  :laugh:

Offline scott64

  • I live here
  • *****
  • Posts: 581
Re: Hello from Aberdeen - Fabia vRS/Bora 4mo S3
« Reply #4 on: 10 September 2011, 08:09 »
welcome to the forum  :cool: a very nice motor

Offline jonnyturbo

  • Forum addict
  • *
  • Posts: 4,806
Re: Hello from Aberdeen - Fabia vRS/Bora 4mo S3
« Reply #5 on: 10 September 2011, 19:36 »
Hello welcome to the site  :smiley:
Gone but still keeping a close eye on it...

Mk4 golf 1.8t AUM Hybrid K03s. Custom Mapped by R-tech to 260bhp. CR hybrid turbo Audi TT injectors / fuel pump, Forge tip,THS FMIC,Carbonio CAI, Full milltek turbo back, N249 bypass, Fully poly bushed, Weitec coils. Genuine R32 front bumper and Genuine R-line rear, Genuine Porsche twists, Anniversary black interior.

Offline RTechUK

  • Forum Supporter
  • I live here
  • *****
  • Posts: 3,379
  • R-TECH OFFICE 01455 617233
Re: Hello from Aberdeen - Fabia vRS/Bora 4mo S3
« Reply #6 on: 10 September 2011, 20:49 »
Hello mate.

Welcome to boragtiforum golfgtiforum!!!

Monday is the day for Bora power!!  I have all day planned to get a huge bulk of the mapping done and to get the torque curve how you want it... Then the rest of the week fine tuning and playing with you map extras.... How about bring the 1st person on the UK to have launch control on a haldex system? Your map is 1mb and I can get it working, Dan only had 512kb map which had one of the LC setting maps missing.




R-Tech Customer Feedback / Reviews
http://r-techpower.co.uk/r-tech-feedback.php
VW AUDI SEAT SKODA 1.8T-1.9TDi -2.0TFSI  Tuners

 01455 617233
http://sticky-vnt.co.uk Midlands

Offline Yohan

  • Here all the time
  • ****
  • Posts: 269
Re: Hello from Aberdeen - Fabia vRS/Bora 4mo S3
« Reply #7 on: 11 September 2011, 11:21 »
welcome to the forum  :cool: a very nice motor

Thanks Scott!

Hello welcome to the site  :smiley:

Cheers Jonny

Hello mate.

Welcome to boragtiforum golfgtiforum!!!

Monday is the day for Bora power!!  I have all day planned to get a huge bulk of the mapping done and to get the torque curve how you want it... Then the rest of the week fine tuning and playing with you map extras.... How about bring the 1st person on the UK to have launch control on a haldex system? Your map is 1mb and I can get it working, Dan only had 512kb map which had one of the LC setting maps missing.



Thanks Nick.

Bora power sounds awesome, can't wait!

As for the torque curve, as long as it comes in as early as possible and holds for as long as possible  :smiley:

Launch control sounds amazing, you'll have to teach me how to work it  :grin:

Offline Thom89

  • Forum addict
  • *
  • Posts: 4,096
  • Looking for an "Icebreaker"
Re: Hello from Aberdeen - Fabia vRS/Bora 4mo S3
« Reply #8 on: 12 September 2011, 23:07 »
Hello, and welcome to the Forum   :cool: :cool:

Thom

Offline Yohan

  • Here all the time
  • ****
  • Posts: 269
Re: Hello from Aberdeen - Fabia vRS/Bora 4mo S3
« Reply #9 on: 13 September 2011, 08:29 »
Thanks Thom  :smiley: