New indicators

[trog_nfs]

What bulbs are they Len? 12v 21W with offset pins? or are they the small 5w capless jobs?

[Len]

Not got them here at work.

They are push in with offset - well you could say pins but its more like a wire on the outside that wedges into the socket.
They are clear with a circular cap.

The ones I bought in Halfords are like and orange tube.

[dom]

Can you not just get some orange LED bulbs instead?

[nikkiy9]

are you able to find an image online of the light you have

[Len]

Can you not just get some orange LED bulbs instead?

If I knew where to get them! Any ideas?

[Len]

are you able to find an image online of the light you have

http://www.venommotorsport.com/product_details.php?id=100&manufacturer=AutoArt&category=Lighting

[thai-wronghorse]

Can you not just get some orange LED bulbs instead?

If I knew where to get them! Any ideas?

Surely eBay will what you're after, there's normally 1000's of various LED bulbs on there.

[eamonnism]

I have the same problem, i (kinda) fixed it, by wiring up the original indicators too, now i have two sets of indicators on the front. 
I'll sort it out at some point...

[Len]

Well I swapped the bulbs for the LED ones and they only work if round the right way!
But no change!
So then I swapped the wires.... still no change!
I really cannot see or think of what can be wrong!

[Screech16v]

Well I swapped the bulbs for the LED ones and they only work if round the right way!
But no change!
So then I swapped the wires.... still no change!
I really cannot see or think of what can be wrong!

Len sounds like those bulbs and led's your using are not drawing enough watts so you need to ad a resistor into the curcuit or ad a normal wattage bulb and tape it up and hide it.