cheers mate i will be changing and upgradding the lot the maf plugs full survise uprated side mount intercooler decat full exhaust the lot mate i want as much as i can get out of a ko3s lol
cheers
The ko3s will flow around 240bhp, but this all depends on how the air is getting in and out the engine, the better the induction, tip, fmic, and turbo back exhaust the better the chance of getting the power. I have not managed to hit 240bhp on an aum with all the oem PVC and n249 in place so would be a good idea to do the catch can mod and vent to atmosphere so the breathing of the vapour don't reduce the octane rating of the fuel.
The major factor to getting 240Bhp is the actuator being weak and worn, a spec1 remap should peak at 19psi and hold 14psi, but when running stage 2 peaking upto 22psi and holding closer to 17-18psi a weak actuator causes the waste gate to creep open and bleed the power off. The cure for this would be a forge actuator with yellow or blue spring and have it mapped correct.
If its running well then you could see 265lbft
