Author Topic: 1.8T cam chain tensioner  (Read 2691 times)

Offline Mr_Orange

  • I live here
  • *****
  • Posts: 2,205
  • MK4 GTi Turbo Exclusive 150 AUM
1.8T cam chain tensioner
« on: 20 June 2011, 20:17 »
Hi,
What does replacing the gasket set (http://www.ecstuning.com/ES258758/) on the 1.8t vvt tensioner achieve?  I've seen it as a DIY on line but its not clear exactly why you would it....  :undecided:
Is it purely for stopping oil coming out down the side of block or does it improve tensioners ability to hold pressure and prevent chain rattle?
Thanks


Build thread clicky

Offline Mr_Orange

  • I live here
  • *****
  • Posts: 2,205
  • MK4 GTi Turbo Exclusive 150 AUM
Re: 1.8T cam chain tensioner
« Reply #1 on: 21 June 2011, 17:54 »
I only ask 'cos at a cold start there is a very brief "rattle" sound a bit like this, but not as bad:
http://www.youtube.com/watch?v=-DrER0ydrIk&feature=related

It's got me worried...... !  :undecided:

It's not the starter (I've replaced that) and it aint the SAI pump (as that's been repaired).

When warmed up I can also vaguely hear the sound of what I think is the chain running.


Build thread clicky

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: 1.8T cam chain tensioner
« Reply #2 on: 22 June 2011, 00:00 »
Might be worth dropping the sump and replacing the oil pump pick up pipe 1st :smiley:

Offline Mr_Orange

  • I live here
  • *****
  • Posts: 2,205
  • MK4 GTi Turbo Exclusive 150 AUM
Re: 1.8T cam chain tensioner
« Reply #3 on: 22 June 2011, 19:36 »
Might be worth dropping the sump and replacing the oil pump pick up pipe 1st :smiley:

Cheers matey.  I'll get it done  :wink:


Build thread clicky