16 v injector!!!!!!!!!!!

[tattoomang60]

hello all .
how do u take out a 16v injector from a 16v kr head. i e do they screw in or
help needed .
cheers ian

[bodga]

I think they just pull out, they sit in rubber seals

[tattoomang60]

tryed pulling it but its proper stuck in like a tick on a dogs arse

[raferackstraw]

ok try an open ended spanner below the nut that connects the fuel line but smaller than the nut and lever it against manifold

[SimonG]

They can be very difficult to remove especially if the rubber seals have gone hard.  Just don't tug on the injector lines. Keep pulling at them.

[tattoomang60]

thats a bloody good idea cheers

[Wayne]

Yep just pop out, but don't pull on the pipe.

[sprout99]

if the sleeves are damaged (plant pot looking things in inlet manifold)
you'll not get them out without taking manifold off....be very careful

i busted 2 injectors. luckily the ends didn't fall inside head