Author Topic: Anyone know if i can lose these?  (Read 2343 times)

Offline Vdub-Dj

  • GTI forum regular
  • ***
  • Posts: 206
Anyone know if i can lose these?
« on: 18 May 2011, 16:42 »
At the risk of sounding really stupid here im going to ask, can i lose these caps off the rear wheels? the only reason im asking is because my centre caps wont go on as they are in the way.



Thought id better double  check before i went ahead just incase they did some kind of important job that i know nothing about  :embarassed:

Offline wrobstar21

  • GTI forum regular
  • ***
  • Posts: 236
Re: Anyone know if i can lose these?
« Reply #1 on: 18 May 2011, 16:53 »
Don't they cover/protect the hub-nut and stuff?

Offline mark-mk3gti

  • I live here
  • *****
  • Posts: 1,073
Re: Anyone know if i can lose these?
« Reply #2 on: 18 May 2011, 16:54 »
as far as i am aware, ideally best to keep em, cos they keep the greece on the part they are protecting, think ive seen where they get flattened a bit with a hammer, but better to do that than not have em at all! :)

someone else will hopefully give you a better description as to what they protect, lol

Offline trog_nfs

  • I live here
  • *****
  • Posts: 975
Re: Anyone know if i can lose these?
« Reply #3 on: 18 May 2011, 17:00 »
they are dust caps for the hubs. Keep grease in and rubbish out of  your bearings etc. Flatten it with a mallet, but don't do too far, as the centre of the hub can poke out a bit, and you'll end up punching a hole in the middle of the cap if you go too far. (Not speaking from experience here of course  :grin:)

Offline LowlifeDubber

  • I live here
  • *****
  • Posts: 1,608
Re: Anyone know if i can lose these?
« Reply #4 on: 18 May 2011, 17:01 »
They are just grease retainers for your rear wheel bearing.They should ideally stay on to stop crap getting in and destroying your bearing.
At most you can flatten it off with a hammer as a lot of them get abused when refitted by a monkey anyway.

I would leave them on though. :wink:


Edit:God damn Trog beat me too it! :evil:

Offline Vdub-Dj

  • GTI forum regular
  • ***
  • Posts: 206
Re: Anyone know if i can lose these?
« Reply #5 on: 18 May 2011, 17:02 »
yeah i was kinda thinking that myself. for some reason though they are not on the fronts just baffled me a bit and i thought maybe they had been taken off.  :undecided:

Offline Vdub-Dj

  • GTI forum regular
  • ***
  • Posts: 206
Re: Anyone know if i can lose these?
« Reply #6 on: 18 May 2011, 17:04 »
Ah i see nice one fellas! just as well i asked then eh! best get my mallet out  :grin:

Offline LowlifeDubber

  • I live here
  • *****
  • Posts: 1,608
Re: Anyone know if i can lose these?
« Reply #7 on: 18 May 2011, 17:07 »
yeah i was kinda thinking that myself. for some reason though they are not on the fronts just baffled me a bit and i thought maybe they had been taken off.  :undecided:

They arnt on the fronts as they are a different type of wheel bearing.The fronts are sealed bearings and the rears are taper roller bearings and require a cap to cover them up. :smiley:

Offline tweed

  • Forum addict
  • *
  • Posts: 5,379
Re: Anyone know if i can lose these?
« Reply #8 on: 18 May 2011, 17:10 »
Hold on a minute. What are the wheels from?
Why can't you trim the wheel center?

Untitled by tweedub, on Flickr

Offline dom

  • 10k hero
  • *
  • Posts: 10,084
  • Back in a Mk4
Re: Anyone know if i can lose these?
« Reply #9 on: 18 May 2011, 17:19 »
Use spacers?