Wayne's Skoda Octavia Vrs - Another induction kit pg92 - Update -page 98

[Horney]

Give em a good T-cut mate.

Nick

[Wayne]

Give em a good T-cut mate.

Nick

Did think of that but the paint feels very soft

[SoundillusioN]

Give em a good T-cut mate.

Nick

Did think of that but the paint feels very soft

Too many coats too soon?

[Bellend]

Try a good hard T cut in the morning. 

[robz]

had that meself!
give it a while to dry out then leather it with t-cut!

[pablo64]

put a couple of coats of lacquer on to give it  shine, wait for paint to harden tho

[F17BAD]

 You need a rotary on them.. shame you are so far away or id do it for you

may aswell give T cut a go or a compound if you have any ?? before you go to the bodyshop

[tech1889]

Tcut is rubbish take them to a bodyshop and ask them to polish them if you don't have a decent compound.. Also how many coats of lacquer you give them ??

[Wayne]

Tcut is rubbish take them to a bodyshop and ask them to polish them if you don't have a decent compound.. Also how many coats of lacquer you give them ??

None that finish was straight from the can

[Bellend]

Proper original T-Cut is the best on cellulose spray cans. Flat the runs out with 1500 and a hard T-Cut. As Kells said, rotary is best. I laquered my rear light poorly just to experiment. Was two coats, cloudy job, rotary and T-Cut and it looks clear as you like!