Author Topic: polished rocker cover (Read 1841 times)

turbomick · « **on:** 09 March 2011, 22:21 »

just a bit of advise on how you do the polished rocker cover and inlet is it just sanded and buffed or are they painted any 1 already had this done

tech1889 · « **Reply #1 on:** 09 March 2011, 22:54 »

lots of sand paper wet and dry.. and then when you get to like 1200 grit stage you can then use a polisher on them with different grade compounds to polish up.... long job

turbomick · « **Reply #2 on:** 09 March 2011, 22:57 »

do u only buff it with compound or do i use polish after wats best compound to get and wer from cheers mate

tech1889 · « **Reply #3 on:** 09 March 2011, 23:00 »

most kits come with the Soap (compound) obviously start with aggressive and get finer till your required finish.. to do an inlet manifold properly does take a lot of time.. pm Hulmie i tihnk he used to do them and sell them he will be able to advise better.