« previous next »
Pages: [1]

Author Topic: First machine polisher recommendations  (Read 1868 times)

Offline Big Tone

  • I live here
  • *****
  • Posts: 1,254
First machine polisher recommendations
« on: 29 January 2011, 08:25 »
As above, looking for a reliable piece of kit, going to practice on an old panel to get my technique.
Looking for a kit and any essentials.

Thoughts please
Logged

****FOR SALE**** 11 Months MOT, 5 Months Tax - 1.8T AUM, Stage 1 map, Lowered 35mm on Jamex Springs, Smoothed Airbox, Pipercross Panel, Forge 007P, N249 Bypass, Silicon Breather Hoses,Silicon Vac Hoses, Top Mounts & Bushes All Round, Catch Can Install,  New Discs and Pads All Round, A Big Sub, A SH*TLOAD of Polishing and A Thirst For V-POWER! Profile/msg for info!

Offline waxamomo

  • Forum Supporter
  • I live here
  • *****
  • Posts: 767
Re: First machine polisher recommendations
« Reply #1 on: 29 January 2011, 13:54 »
The new Deltalyo Power Plus would be my choice, it is a new powerful DA with a few other nice extra's......less vibration, longer power cable etc etc.

As for polish and pads, give me a budget to work too and i'll try and sort you a nice kit out  :wink:

Chris
Logged

Offline Dan J

  • I live here
  • *****
  • Posts: 1,775
  • Pro Valeting and correcting paint since 95
Re: First machine polisher recommendations
« Reply #2 on: 29 January 2011, 15:32 »
chris will sort you out a good deal Big Tone, go for it.
Logged
I EAT CARNAUBA FLAKES FOR BREAKFAST!!!

Offline Big Tone

  • I live here
  • *****
  • Posts: 1,254
Re: First machine polisher recommendations
« Reply #3 on: 29 January 2011, 15:46 »
What would I get if I said 200
Logged

****FOR SALE**** 11 Months MOT, 5 Months Tax - 1.8T AUM, Stage 1 map, Lowered 35mm on Jamex Springs, Smoothed Airbox, Pipercross Panel, Forge 007P, N249 Bypass, Silicon Breather Hoses,Silicon Vac Hoses, Top Mounts & Bushes All Round, Catch Can Install,  New Discs and Pads All Round, A Big Sub, A SH*TLOAD of Polishing and A Thirst For V-POWER! Profile/msg for info!

Offline waxamomo

  • Forum Supporter
  • I live here
  • *****
  • Posts: 767
Re: First machine polisher recommendations
« Reply #4 on: 29 January 2011, 17:16 »
Quote from: Big Tone on 29 January 2011, 15:46
What would I get if I said 200

That would be more than enough, lets have a look.....

Deltalyo DA - £119.95
Meguiar's No. 80 - £12.95
Meguiar's No. 84 - £13.95
Meguiar's Finishing 7" Pad - £11.95
Meguiar's Polishing 7" Pad - £11.95
Dodo Juice Small Backing Plate - £9.95
Sonus SFX 2 & 3 4" Pads - £9.90

That would be a great starter kit that gives you a great machine with both big and small pads. The DA comes complete with a 5' and 6" backing plate which saves you a bit of money. We have got the sale on until midnight tomorrow which would give you 10% off the prices above, plus you would still earn another 5% in reward points to use towards your next order  :wink:

I haven't added any compounding pads in, you may want to if you have any specific scratches you want to have a go at.

Let me know what you think,

Chris
Logged

Offline Big Tone

  • I live here
  • *****
  • Posts: 1,254
Re: First machine polisher recommendations
« Reply #5 on: 29 January 2011, 18:14 »
Looks good, will be about a week or so though,
What about polish, glaze, sealant?

I have 500ml AG SRP, going to buy purple haze and jetseal, do I need anytging else?
Logged

****FOR SALE**** 11 Months MOT, 5 Months Tax - 1.8T AUM, Stage 1 map, Lowered 35mm on Jamex Springs, Smoothed Airbox, Pipercross Panel, Forge 007P, N249 Bypass, Silicon Breather Hoses,Silicon Vac Hoses, Top Mounts & Bushes All Round, Catch Can Install,  New Discs and Pads All Round, A Big Sub, A SH*TLOAD of Polishing and A Thirst For V-POWER! Profile/msg for info!

Offline waxamomo

  • Forum Supporter
  • I live here
  • *****
  • Posts: 767
Re: First machine polisher recommendations
« Reply #6 on: 29 January 2011, 20:35 »
SRP, No.80 and No.84 are all polishes.

Just need applicators and a few microfibres and that should be you  :smiley:
Logged
Pages: [1]
« previous next »