bora foils

[andc1]

will these fit mine, i have a 99 agu, add says with no centre display but i have the same warning lights except handbrake light and also i have underneath a screen telling me when i need fuel/water etc

http://cgi.ebay.co.uk/VW-MK4-BORA-SPORT-CLOCK-OVERLAY-INSTRUMENT-CLUSTER-FIS-/160520093381?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item255fbe3ec5

[richw911]

Wez is the man to answer this one 

[andc1]

come on wez!!!

[jamie16v]

i think they are immo2, not sure if yours are immo1 being with out the display but if all the lights are in the right place then it`ll be fine.
could just cut out the screen bit if thats the case, just make sure first thought...lol

[old_n07]

They will fit but ideally you need to get your foils out and compare the position of the symbols.

MK4 Golfs (even the very early ones) are either immo 2 or post 2001 are immo 3. Don't worry about the extra bit in the middle as they are none FIS foils but they can be cut to suite your cluster using your existing foils as a template

[richw911]

Wez is the man to answer this one 

Or of course Neil the clocks expert   

[old_n07]

Wez is the man to answer this one 

Or of course Neil the clocks expert   

 

[andc1]

heres my clocks

[old_n07]

The foils are £30 something, while there are immo2 sport clusters going for arround the £60 mark on ebay, just a thought especially as you will need rings and needles to complete the cluster....

Ideally you need to match ALL the symbols to the foil, from the ones I can see you should be OK but the ones in the rev counter can't be seen or the ones that aren't illuminated.

[andc1]

true but rings are only £20 and i believe mk5 needles fit? it will cost me £20 to recode new clocks in then milege correction,
1 question tho, when i take my clocks out will i have issues when i refit? due to immobiliser being part of the clocks