headlight adjuster

[sharki786]

toopay: did you have to change the full loom from the switch to the lights or just connect it up in the engine bay??

[Jack3559]

Do the adjusters work if you swap to vento lights?

[Wayne]

Do the adjusters work if you swap to vento lights?

Yes as some Vento headlamps have the motors.

[Toopay_MkIII_GT]

just connected it all up from engine loom, didnt have to do anything within the dash

and yes the adjusters work with vento lights

[harlemex]

Hahaha the thing is nobody really cares apart from you.

looks like you are wrong pal.

[harlemex]

There seems to be a a little confused info about wiring. I dont know about vento lights, but I kinow for starters you need the correct headlamp switch with adjusters on it. There is an extra connector needed to go into this. As for the motors, you will need a light loom with them on(I think) similar to your usual loom that has the large multiplug above the radiator. You will not need a new dash loom if you have a gti or similar as the wiring already exists.

[Toopay_MkIII_GT]

^^ correct

[sharki786]

mine is an 8v gti anniversary so should just be plug and play??

[Toopay_MkIII_GT]

yep 

[marky-gee]

so

Do you need anything else , as i have a set of hella's and i also have adjusters as standard ?

Im looking at the diagram as you need some sort of plastic caps for the ball on the motor ?