Rhyso's 205bhp Posh Golf....Gone :(

[richw911]

No he has 191.5 bhp and 330lbs ft of torque 

[Rhyso]

No he has 191.5 bhp and 330lbs ft of torque 

Lol that was yesterday    And the high torque figure could have been done to the gear ratio / speed being slightly out but with it properly calibrated and a few tweaks

[Wayne]

195bhp how much more would you gain if you removed the dpf.

[Rhyso]

195bhp how much more would you gain if you removed the dpf.

Figures vary and people quote anything from 10-25 extra bhp

My plan is to run the car as it is and monitor the DPF levels; its still doing its job nicely (hugs a very large tree) and my motorway journeys do a grand job of burning off the soot it collects

If and when it fails I will replace it but until then its staying put 

[Fabla]

195?? Wtf? Nice!

What's the bottom graph line mean?

[Rhyso]

195?? Wtf? Nice!

What's the bottom graph line mean?

The slightly wavy one?  That's my torque figure which is approx 310lbs ft torque 

[Wayne]

195?? Wtf? Nice!

What's the bottom graph line mean?

The slightly wavy one?  That's my torque figure which is approx 310lbs ft torque 

Pity your clutch with that much torque 

[Rhyso]

195?? Wtf? Nice!

What's the bottom graph line mean?

The slightly wavy one?  That's my torque figure which is approx 310lbs ft torque 

Pity your clutch with that much torque 

Yeah I didn't actually expect it to be producing that much as most 150's and 170's struggle to make over 300lbs ft

Meant to grab the graph when it was run with the standard map; it made 174 bhp and 280lbs ft - standard is 170bhp and 256lbs ft 

[Steve_PD]

now you know what its like to have a pd150
Good results. knowing you you'll be romoving the dpf in a couple months once you get bored

[Rhyso]

now you know what its like to have a pd150
Good results. knowing you you'll be romoving the dpf in a couple months once you get bored

But with 8 more valves and an extra 0.1 litres 

Only if I've killed it    Its going to be a long term evaluation as its still up in the air as to whether or not the MOT regs will require the DPF to remain in place to pass..........