that chould just be valve stem seals.
if your sparks are fine it chould be an injector gone down ( or more likely the wires to it ) or that cyl has lost compression.
you chould try running it with a plug lead off 1 cyl then the next, if on any cyl it dosent change the way the engine runs compared to when all 4 are connected you have found where the problem is.
chould be a plug given up ( rare but it dose happen )
choudl be an injector ( also rare but it dose happen )
infact it chould be meany things once you have done a CR test all will be much clearer
to stop a cyl fireing it's ether got no fuel, no spark or no compression