With the light switch in the 0 (off) position, and the ignition off.
Put the indicator into the left turn (down) position.
Pull the stalk towards you as if you're flashing your headlights and hold it there (still with the stalk down/left.)
Turn the ignition to on (no need to start the engine.)
Wait for 3 seconds and you'll here a ding noise.
Release the headlights and centre the indicator switch.
Your DRL's should be off.
To switch them on again, do the same, but instead turn the indicator stalk up or right.
DOES NOT WORK ON XENON's
