Hey guys and gals,
Not been on for a while as tiscali cocked up my internet when transferring me to a talk talk line grrrr!
So anyway whilst ive been away ive fitted some FK street coilovers and smoothed my front rub strip :0)
Opinions Please :0)









Had a couple of additions since then but like a muppet i always forget to take pictures!
Lets start with the turbo
My car is an AGR 90 which runs a Ko3 turbo from the petrol, so i managed to bag myself a 5door 110 (AHF) ironically finished in LC7V like mine used to be

The 110 has the same engine as mine but uses a VNT15 (slightly smaller than the VNT17 from the 130
So that got fitted, made a MASSIVE diffrence! Also Cleaned out the intake manifold will try and get some pictures up when i find some.
The 110 uses .205mm injector nozzles where as my 90 uses .187mm so i upgraded mine to .216mm nozzles from a T4 Transporter and omg! i actually have some power now lol!
Heres a couple of pictures of the old & new nozzles
New nozzles

Old nozzle


Nozzle removed

Old vs New

New Fitted

Also bagged myself one of these bad boys.. its uber chunky! Love It!!

Got me some nice Bora Sports with Full FIS.. my car didn't have any Trip computer so i had to wire in a new wiper stalk with buttons and the wire for the temp sender (which i need to replace as there are too many joins in it and its reading the temps wrong)
Wiring in the stalk...




Miles to empty enabled

Illuminated Needles

These are the muts nuts.. Looks so much cleaner!
Also got some bora vents but dont have a picture of those...
And these bad boys... (only picture i could find before i wet vaced them)

Sooooo much comfier!
Then decided i wanted to joey my headlights so out came the heatgun and seal picks..

The glue vag use would survive a nuclear bomb honestly its unreal!!


Painted them the same gloss black i used on the roof and wheels

Comparison shot

Fitted to the brum

Got my hands on a nice clarion double din!

Painted the surrounds again the same gloss black as the roof (not the best picture)

Fitted some poverty spec rears and repeaters to add a bit of colour
(tinted the reverse light)


Then a little bit of personalisation

I think thats pretty much it.. if i think of anything else ill post it up!
Opinions please
Kyle!