I've decided this camera isn't very good. (Camcorder with photo option)
Left:Scabby old bolt
Right:One of spent some time polishing.



All three done I just need to do a little more on the middle one and possibly go up to 1500 and I need to buy some metal polish to finish.

Well pleased with the result, took me AGES to do the rocker cover I couldn't stand a mishaped bit even though there is no way of seeing it when on.

The bolts (if anyone else wants to have a go) was a rub off with 80 on a sander then:
-Pillar drill at med. speed with 80grit on a block
-Pillar drill at fast speed with 80grit on a block
-Pillar drill at med. speed with 400grit on a block
-Pillar drill at fast speed with 400grit on a block
-Pillar drill at fast speed with 800grit on a block
-Pillar drill at fastest speed with 1200 on a block
You want to remove the marks of the previous grit everytime until you have fully even round marks then go up. The paper was saturated and kept wet with a strong Fairly liquid and water mix.