vagcom coding for audio / telephone... help please!

[p3eps]

I've spent the morning hacking my car apart when I should be out driving it!!

I have an RCD510 with Dynaudio and reverse cam in the car as standard.
I'm trying to put in an RNS510 and Fiscon bluetooth kit.

I spent ages routing the Mic, then took out the RCD plugged in the Fiscon, then plugged in the RNS.  I thought I'd test it all before putting it back together, so its still sitting in pieces just now!
I get some odd codes from the vagcom - probably because my ECU isn't in their database yet?

Anyway - I followed the setup on My-GTI for the Dynaudio, so I think thats working... although I don't get a Dynaudio logo on startup anymore.  I've managed to get the reverse cam working too, but unlike my RCD, I can only have Cam OR Sensors.  The RCD lets me have a split screen with both.  I guess thats the RNS firmware though?

The thing thats puzzling me most in the Fiscon.  My autoscan from the vagcom says '77-Telephone -- Status: Not Registered 0001' - but when I try and enter 77 to enable it, it times out.  Maybe I'm doing something stupid?  If I press the Phone button on the RNS, it says no phone connected or not set up.  How do I get this working?

My other question is how do I get street names / Nav Info on the MFD?  I've managed to get the multifulction steering wheel controls working - just not the MFD.

Is it normal for the RNS to have a fan on when I switch the car off?  I guess it just goes off after a few minutes?

[p3eps]

Oh... and another thing.

I went out just now (about 5 mins since last time!) adn the fan had stopped... but when I listened to it carefully it was still buzzing.
When I start the car, I don't get any startup screen.  It seems like its been on the whole time.

Any ideas?

[p3eps]

Hmmm... went out after about 45 mins, and the RNS is still making a buzzing sound (not in a bad way - just like its on) - so I've taken it out and put the RCD back in for the time being.  The last thing I want is my battery going flat after 1 day!!

I think I may have the answer to the Fiscon query - by reading the manual!!!
Away out with my laptop to have another go 

[p3asa]

I installed the RNS510 the other day and I have the Fiscon installed. At first they didn't appear to work with each other but a simple switch off and back on got them working together.

As for the RNS510 on while you aren't in the car, I think it is somehow linked to the doors / interior lights etc. What I mean is, when I unlock my car its as if the RNS510 bursts in to life knowing full well its about to get switched on so gets ready for it.

I could be talking bull but its definitely off when I lock the doors 

[p3asa]

Oh and I hope you are keeping note of what you are doing with the VAG COM as I still need to get
RVC up and working
have the MFSW buttons working
Song titles in the MFD
Directions in the MFD.

 

[p3eps]

As for the RNS510 on while you aren't in the car, I think it is somehow linked to the doors / interior lights etc. What I mean is, when I unlock my car its as if the RNS510 bursts in to life knowing full well its about to get switched on so gets ready for it.

Its not like its on... its just if you listen very carefully it makes a dull humming noise.
When it switches on, its STRAIGHT on with a full Sat signal and playing the iPod.  No start up screen or anything.

Now I understand that these things run Windows in the background and probably take a few minutes to cool down / switch off after use.  But I've been leaving it for over an hour, and its immediately on when I turn the ignition key.
Doesn't sound right to me!  I'll maybe try upgrading its firmware and see if that helps.

I can help you out with most of your list - I'm still waiting for Directions on the MFD though.  It was maybe something I ticked at about 4pm when I got the Fiscon working!

[VWKev]

you pair's user names are way too close. 

Hope you get it sorted out p3eps. Get yourself out for a drive tho mate and enjoy your car for a bit. It's a little beauty.

Then when you come back, fit that Fiscon and send me a guide I wanna do mine tomorrow as I'm fitting my LED's then too 

[mortygt140]

P3eps have you done a cold reset on the RNS510 < > & i on the unit? have you ticked the BAP protocol for mk6 golfs and also the shortpress steering wheel buttons needs to be ticked.

In the can gateway the navigation needs to be activated to get it in the mfd,

http://www.mk5golfgti.co.uk/forum/index.php/topic,9350.msg147077.html#msg147077

Darren

[p3asa]

Its not like its on... its just if you listen very carefully it makes a dull humming noise.
When it switches on, its STRAIGHT on with a full Sat signal and playing the iPod.  No start up screen or anything.

Yes that's what I mean. Its as if it sits in stand-by and then when the doors are unlocked it gets ready for action but without firing up the screen.

What I noticed with mine is if I leave it a long period of time like overnight, when I switch the ignition on it comes up on the screen "Starting up" or words to that effect. Yet if I leave it only a couple of hours it appears to boot instantly with no "Starting up" screen.

[p3eps]

P3eps have you done a cold reset on the RNS510 < > & i on the unit? have you ticked the BAP protocol for mk6 golfs and also the shortpress steering wheel buttons needs to be ticked.

In the can gateway the navigation needs to be activated to get it in the mfd,

http://www.mk5golfgti.co.uk/forum/index.php/topic,9350.msg147077.html#msg147077

Darren

Thanks for the link.  I think I've got all that - the one I was missing was the Can Gateway one... which I got when I found the Telephone one for the Fiscon in the manual!!  I don't have shortpress ticked, but the buttons seem to work?

I'm more concerned by the unit being on all the time.  I'll try that Cold Reset tomorrow and see if it fixes it.