Author Topic: Just done the heater matrix!  (Read 1614 times)

Offline drapergti

  • Here all the time
  • ****
  • Posts: 254
Just done the heater matrix!
« on: 22 March 2010, 22:49 »
Bearing in mind I'm a TOTAL novice just finished changing the matrix and radiator, put in a new newton commercial carpet and underlay now totally knackered and cut to ribbons...feels like a mk2 rite of passage!

Thank god for the advice on here... :smiley:

Offline Thom89

  • Forum addict
  • *
  • Posts: 4,096
  • Looking for an "Icebreaker"
Re: Just done the heater matrix!
« Reply #1 on: 22 March 2010, 23:01 »
Well done! did mine last year... did you do it without taking the dash out?
Thom

Offline drapergti

  • Here all the time
  • ****
  • Posts: 254
Re: Just done the heater matrix!
« Reply #2 on: 22 March 2010, 23:02 »
Just the lower parts, took my time over it though!

No heat yet as I have not had a chance to get the air out of the system...lets hope I don't have to redo it... :cry:

Offline Thom89

  • Forum addict
  • *
  • Posts: 4,096
  • Looking for an "Icebreaker"
Re: Just done the heater matrix!
« Reply #3 on: 22 March 2010, 23:15 »
Mine took ages to bleed, but all worth it in the end
Thom

Offline drapergti

  • Here all the time
  • ****
  • Posts: 254
Re: Just done the heater matrix!
« Reply #4 on: 22 March 2010, 23:16 »
Well that gives me hope! cheers!

Offline cняis

  • I live here
  • *****
  • Posts: 3,034
  • Know there's something burning over there...
Re: Just done the heater matrix!
« Reply #5 on: 22 March 2010, 23:40 »
did one a couple of years ago, lots of swearing and cut fingers!! a bit of a pain but better than wet feet!

how long did it take you? i spent about 8 hours doing it  :lipsrsealed:


I don't think a semi will give the same results

Offline drapergti

  • Here all the time
  • ****
  • Posts: 254
Re: Just done the heater matrix!
« Reply #6 on: 22 March 2010, 23:41 »
about the same  :laugh:

Offline cняis

  • I live here
  • *****
  • Posts: 3,034
  • Know there's something burning over there...
Re: Just done the heater matrix!
« Reply #7 on: 22 March 2010, 23:44 »
and how is your back after getting into all kinds of painful positions?  :grin:


I don't think a semi will give the same results

Offline Thom89

  • Forum addict
  • *
  • Posts: 4,096
  • Looking for an "Icebreaker"
Re: Just done the heater matrix!
« Reply #8 on: 22 March 2010, 23:45 »
3 hours  :lipsrsealed: took me longer to bleed the sodding thing :grin:
Thom

Offline drapergti

  • Here all the time
  • ****
  • Posts: 254
Re: Just done the heater matrix!
« Reply #9 on: 22 March 2010, 23:48 »
and how is your back after getting into all kinds of painful positions?  :grin:

Pretty fecked... :laugh: