Author Topic: Put my Golf MK3 Alloys onto a Peugout 306? (Read 2200 times)

vwgolfowner · « **on:** 23 November 2009, 23:16 »

So I crashed my VW GOLF Mk3 (Not GTI)

Was wondering if I could put my alloys from this car onto a Peugout 306? If wheels are the same size?

VR6-Joe · « **Reply #1 on:** 23 November 2009, 23:24 »

Not unless the wheels are multi fitment, no

VW P.C.D is 4x100
Peugeot P.C.D is 4x108

Wayne · « **Reply #2 on:** 23 November 2009, 23:35 »

Ford alloys will fit a Pug with spiggot rings.

vwgolfowner · « **Reply #3 on:** 24 November 2009, 03:44 »

There no attachment or anything I would get to make it work?

Wayne · « **Reply #4 on:** 24 November 2009, 07:54 »

There no attachment or anything I would get to make it work?

Not really as adaptors will screw up the offset.

vwgolfowner · « **Reply #5 on:** 24 November 2009, 19:35 »

Ok thanks

Mikester · « **Reply #6 on:** 24 November 2009, 19:56 »

Adapters will cost 4 times more than the wheels are worth too.

Wayne · « **Reply #7 on:** 25 November 2009, 09:18 »

Adapters will cost 4 times more than the wheels are worth too.

Good point

vwgolfowner · « **Reply #8 on:** 26 November 2009, 03:15 »

How much roughly would an adapter cost for all 4 wheels?

It seems such a waste scrapping these alloys, when my 306 has just plastic.

Wayne · « **Reply #9 on:** 26 November 2009, 09:22 »

How much roughly would an adapter cost for all 4 wheels?

It seems such a waste scrapping these alloys, when my 306 has just plastic.

Never worth the expense, adaptors are going to cost you £150 to £250

GolfGTIforum.co.uk