4 mo valence wont clip in!!!!!!!!!

[nadlad]

having a real problem gettign the end clips in round the arch they go in ok round the back along the front but then where the valence turns and clips to the underside of the srch it wont go in prperly, it keeps comign out of the lugs any ideas?

gonna take the bumper off tomorrow and have a go

[dai-cymru]

is it a genuine valence

[nadlad]

got it from vw so yeah

[Mikesps]

I have that same problem 

[Mikesps]

Heres mine! just doesnt want to clip in

[tg1]

take it back off and refit, i had the same problem with my jom valance, you can fit 99 percent if they aren't on square.

Took a few attempts on mine to get it 100 percent

[nadlad]

Heres mine! just doesnt want to clip in

mate ave got the exaxt same problem on both sides i looked from underneath and the plastic lugs slide in to the slots but then they just slide back off gonna take the bumber off and do it i think.. feckign annoying

[Rhyso]

not sure if you did it this way but clip the corners in first and then clip in the rest of the valence

[nadlad]

not sure if you did it this way but clip the corners in first and then clip in the rest of the valence

thats a good idea will try that so clip corners from both ends first? need 4 hands now

[Rhyso]

not sure if you did it this way but clip the corners in first and then clip in the rest of the valence

thats a good idea will try that so clip corners from both ends first? need 4 hands now

no you should be able to clip in one side and then the other

then clip in the rest, working alternate sides - i.e couple of clips on the left and then a couple on the right until you reach the middle