Author Topic: bora clocks help  (Read 1105 times)

Offline bobreece

  • I live here
  • *****
  • Posts: 653
bora clocks help
« on: 14 October 2009, 01:11 »
i have some bora sport clocks with a scratch on is there anyway of buffing or poliching it out? i heard of someone on this forum haveing same problem and buffing it out any help guys?

Offline old_n07

  • I live here
  • *****
  • Posts: 728
Re: bora clocks help
« Reply #1 on: 14 October 2009, 07:23 »
Patch did it, he used a dremel, braso and some plastic polish IIRC and they came up like new there is a thread about it over on UK-MKIVs but I can't find it at the moment :afro:

If you are using plastic polish then some sort of machine is recomended as it can take an age by hand but be careful not to burn the plastic :wink:

Neil
« Last Edit: 14 October 2009, 07:25 by old_n07 »
Quote from: mikemk4golf
Hey you're a moderator, I want a serious answer not someone who takes the piss!

Grammar is the difference between Helping your Uncle jack off a horse and Helping your Uncle Jack off a horse.

Not so standard Gt TDi
Cluster Mods FAQ | Miles to Empty Guide

Offline northeast_gti-t

  • Serious forum addict
  • *
  • Posts: 6,554
  • "1.8T AGU"
Re: bora clocks help
« Reply #2 on: 14 October 2009, 12:07 »
Patch did it, he used a dremel, braso and some plastic polish IIRC and they came up like new there is a thread about it over on UK-MKIVs but I can't find it at the moment :afro:

If you are using plastic polish then some sort of machine is recomended as it can take an age by hand but be careful not to burn the plastic :wink:

Neil
aye he did i can remember that and when it was finished it looked as good as new to  :cool:
2000 Mkiv GTi 1.8T AGU

Offline bobreece

  • I live here
  • *****
  • Posts: 653
Re: bora clocks help
« Reply #3 on: 14 October 2009, 14:02 »
carnt find it either guys

Offline chrisr103

  • I live here
  • *****
  • Posts: 1,136
Re: bora clocks help
« Reply #4 on: 14 October 2009, 17:42 »
Its half way down on page 4 of his build thread

http://uk-mkivs.net/forums/t/201437.aspx?PageIndex=4

<a href="http://giffgaff.com/orders/affiliate/chrisr45" target="_blank"><img src="http://giffgaff.com/banner/01_80x15.png" width="80" height="15" alt="Get a free giffgaff Sim" /></a>

Vagcom-Diagnostic,Code Clearing,Anti Hijack,Alarm Beeps,Cluster Swaps
Vagtacho-Miles To Empty,Illuminated Needles,Key Coding,

Offline bobreece

  • I live here
  • *****
  • Posts: 653
Re: bora clocks help
« Reply #5 on: 15 October 2009, 03:07 »
cheers m8 found it i tried some megs plasticX stuff its done pretty good but going to try the brasso as well