« previous next »
Pages: 1 2 [3]

Author Topic: how do i fit a rear valence if i have this shyte on?  (Read 6400 times)

Offline nadlad

  • I live here
  • *****
  • Posts: 1,434
  • Building Surveyor MRICS
Re: how do i fit a rear valence if i have this shyte on?
« Reply #20 on: 13 October 2009, 14:56 »
ad probably cut it out you know seems liek less hastle and to be frank yours  looks just like the 4mo one.  i also  got them fidely parking sensors there too and you cant really tell the only thing is i may have a wire running so i dont want to cut it or there may be a sensor there?
Logged


.........................................
<<<Big Build Thread>>>

Offline nadlad

  • I live here
  • *****
  • Posts: 1,434
  • Building Surveyor MRICS
Re: how do i fit a rear valence if i have this shyte on?
« Reply #21 on: 13 October 2009, 14:58 »
having said the above your rear valence seems to be different to mine, you seem to have more plastic and mine is shorter in width if u see what i mean

mine seems to look lieka 4mo rear valence without the cutout?
« Last Edit: 13 October 2009, 15:04 by nadlad »
Logged


.........................................
<<<Big Build Thread>>>

Offline nadlad

  • I live here
  • *****
  • Posts: 1,434
  • Building Surveyor MRICS
Re: how do i fit a rear valence if i have this shyte on?
« Reply #22 on: 13 October 2009, 21:27 »
last question how do i take the front and rear valences off?
Logged


.........................................
<<<Big Build Thread>>>

Offline rickgtimk4

  • Not said much yet
  • **
  • Posts: 22
Re: how do i fit a rear valence if i have this shyte on?
« Reply #23 on: 14 October 2009, 08:03 »
Quote from: nadlad on 13 October 2009, 21:27
last question how do i take the front and rear valences off?

Front Valance - There are torx screws inside the front wheel arches. Once they have been removed the front valance will come off. It clips on so you will need to pull and tug at it. Not the easiest thing to remove!

Rear Valance - Same as the front but there are also two torx screws on the under side.
Logged
1.8T GTi 180bhp - Montreal II Alloys - Heated Black leather Ricaro seats - Stainless steel Sparco pedals - New South Indigo Boost Gauge - Boot spoiler - Grill fog lights - Angel Eyes - LED running lights - Painted Calipers - Sparco Aero Wipers - Brushed Aluminum trim - Scorpion Monaco Cat back - Pipercross Panel Filter
<a href="http://lilypie.com/"><img src="http://lbdf.lil
Pages: 1 2 [3]
« previous next »