When coding, only the last byte is 18 in the Bordnetzsteuergrät (BCM). To this end, the bit 2 is set to 1 or enabled. Byte 18 factory setting = 00 HEX Byte 18 = 00000000 binary factory setting 18 LED byte encoding HEX = 04 Byte 18 LED binary encoding = 00000100
Are there RHD/LHD issues in doing this conversion? Where are the fog light and reverse light on the LEDs? Is it the same set up on both LHD and RHD or are they swapped like on the MK5?
If only you was a mod Kev