Okay start off by removing the bulbs, then putting the headlight in the oven for 2-5 mins depending on how quik the sealant sofens, then the sealant should be nice and soft allowing you to remove the glass from the housing, then you need to peel all of the excess sealant off, mask up the reflective parts of the headlight, MAKE SURE TO STICK THE MASKING TAPE ONTO A TEE-SHIRT A FEW TIMES FOR IT TO BE LESS STICKY,maskingtape will peel the reflective surface off if its too sticky, then spray the rest of the surface with some HIGH TEMP paint, couple of coats, i even did the plastic housing edge for extra effect

, remove masking tape clean the glass part of the headlight while its apart, then reseal, fit bulbs, plug and play
