« previous next »
Pages: [1] 2

Author Topic: Will this Mk4 gaitor fit an MK3?  (Read 1647 times)

Offline Madmax

  • I live here
  • *****
  • Posts: 612
Will this Mk4 gaitor fit an MK3?
« on: 13 August 2009, 08:50 »
As above, looking to get a new gaitor as i don't really like the stock one, would one fit?
Looking at these: http://cgi.ebay.co.uk/Gear-shift-knob-gaitor-for-VW-Golf-Jetta-MK4-Bora_W0QQitemZ180385777946QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item29ffd4891a&_trksid=p3286.c0.m14

Which look kinda nice & seeing some guys over in the MK4 forum have them. :)
« Last Edit: 13 August 2009, 08:53 by Madmax »
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Will this Mk4 gaitor fit an MK3?
« Reply #1 on: 13 August 2009, 08:59 »
It might / will fit with mods.
Logged

Offline Madmax

  • I live here
  • *****
  • Posts: 612
Re: Will this Mk4 gaitor fit an MK3?
« Reply #2 on: 13 August 2009, 09:05 »
Thanks Wayne, i'll give it a miss then i'm not really good with mods. :embarassed:
Logged

Offline Andy-H

  • I live here
  • *****
  • Posts: 2,204
Re: Will this Mk4 gaitor fit an MK3?
« Reply #3 on: 13 August 2009, 09:34 »
Logged
'95 Mystic blue Mk3 2.0l 8v - gone
'93 2.0l 16v Corrado - gone (and missed)
'02 A4 Quattro sport - gone
'91 Black 2.1 16v Corrado -gone
'91 Tornado red Mk2

Offline Shady Pioneer

  • Serious forum addict
  • *
  • Posts: 8,670
  • graphic designer.
Re: Will this Mk4 gaitor fit an MK3?
« Reply #4 on: 13 August 2009, 11:28 »
GTiAdam got a MK4 gaitor on, I don't think it was that bad for him either, it was the gear knob that was the worst.
Logged

Offline Adam

  • Forum addict
  • *
  • Posts: 5,194
Re: Will this Mk4 gaitor fit an MK3?
« Reply #5 on: 13 August 2009, 11:52 »
It does fit you just need to mod it slightly. The mk4s throw is shorter then the mk3s so the gaiter will pop off when you select 4th gear.

The MK4 knob clips on to the shaft where as the MK3 screws onto the shaft. Get a drill bit a few mm smaller than the mk3s shaft and drill inside the MK4 gearknob. Then screw it onto the shaft. Job done  :cool:




Logged

Down Hill From Here.

Offline Madmax

  • I live here
  • *****
  • Posts: 612
Re: Will this Mk4 gaitor fit an MK3?
« Reply #6 on: 17 August 2009, 08:59 »
OK thanks, i'd rather have one that pops straight in tho (lazy) :smiley:

I just bought this gaitor for my red MK3, think it'll look rather nice. :)

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250481113004&ssPageName=STRK:MEWNX:IT
Logged

Offline crankycalf

  • Not said much yet
  • **
  • Posts: 50
Re: Will this Mk4 gaitor fit an MK3?
« Reply #7 on: 17 August 2009, 20:51 »
I got one off the bay did a bit of chopping, Got some hard wire and molded it to fit around the mk3 base then stitched the gaitor to it and you can now stretch it and take it on and off like the original part

http://www.golfgtiforum.co.uk/index.php?topic=111366.0

i got it like this:


and fitted so it looks like this:

Logged

Offline Shady Pioneer

  • Serious forum addict
  • *
  • Posts: 8,670
  • graphic designer.
Re: Will this Mk4 gaitor fit an MK3?
« Reply #8 on: 17 August 2009, 23:34 »
This mod is one of those really subtle mods, but adds a fresh feel to the inside of the car :)
Logged

Offline VR6-Joe

  • I live here
  • *****
  • Posts: 3,638
Re: Will this Mk4 gaitor fit an MK3?
« Reply #9 on: 17 August 2009, 23:35 »


Logged
Gone but not forgotten;
1983 Mk1 Golf GX - 1991 Mk2 Golf GTI - 1988 Scirocco Scala - 1989 Mk2 Golf CL - 1993 Mk3 Golf Ryder - 1996 Mk3 Golf SE - 1996 Mk3 Golf CL - 1995 Mk3 Golf GTI 16v - 1996 Mk3 Golf VR6 Highline - 2003 Saxo VTR - 1996 Mk3 Golf VR6
Pages: [1] 2
« previous next »