Author Topic: 8v and 16v exhaust (Read 1778 times)

Cable · « **on:** 01 July 2009, 12:42 »

are the standard systems the same or is the bore different?

Petec82 · « **Reply #1 on:** 01 July 2009, 12:43 »

16v has a bigger bore!
Pete

Len · « **Reply #2 on:** 01 July 2009, 12:59 »

Yep and not even worth thinking about mix n matching!

funkyfive · « **Reply #3 on:** 01 July 2009, 13:23 »

I disagree, i put a VR6 Magnex exhaust system onto my 8v without a reducer sleeve.

Len · « **Reply #4 on:** 01 July 2009, 13:24 »

Well the VR6 must be different bore to a 16v then!

Adam · « **Reply #5 on:** 01 July 2009, 13:25 »

There seams to be a bit of confusion over sizes.

Mikester · « **Reply #6 on:** 01 July 2009, 17:50 »

8v is different to the 16v and vr6, which are the same. But think the difference is only 1/4 inch.

Cable · « **Reply #7 on:** 01 July 2009, 18:29 »

thanks, so the standard 8v wont fit the 16v. does any 1 know where to get a standard 16v cat back exhaust system for cheap?

Mikester · « **Reply #8 on:** 01 July 2009, 18:32 »

Probably would be best to look for a 2nd hand one on the usual forums.

If not, have a look at GSF's and ECP for new ones.

funkyfive · « **Reply #9 on:** 01 July 2009, 22:03 »

I would phone kwik fit and ask them the bore size, i bet they say its 55mm for the 8v, 16v and VR6?

GolfGTIforum.co.uk