« previous next »
Pages: 1 [2]

Author Topic: Catch Tank  (Read 3644 times)

Offline bacillus

  • I live here
  • *****
  • Posts: 1,231
Re: Catch Tank
« Reply #10 on: 06 May 2009, 19:36 »
Quote from: edition_30 on 06 May 2009, 18:44
the ones of ebay be suffice?

No!
You need some way to vent the pcv vapours and the kit does this by including a specially machined plate that replaces the oem pcv and has the necessary venting holes.
If you could find a cheap and suitable way of replacing the oem pcv with something similiar, then you could use any other catch can you want from ebay.
« Last Edit: 06 May 2009, 20:07 by bacillus »
Logged
Without traction power is nothing!

Offline bacillus

  • I live here
  • *****
  • Posts: 1,231
Re: Catch Tank
« Reply #11 on: 06 May 2009, 19:47 »
Quote from: RedRobin on 06 May 2009, 17:19
....

I assume that installing the BSH will result in the stock engine cover no longer fitting.

It can be made to fit with a little modifcation of the stock air box.

You could try the fitting method Ukdub has used or use an alternative like below.


Logged
Without traction power is nothing!

Offline edition_30

  • Not said much yet
  • **
  • Posts: 41
Re: Catch Tank
« Reply #12 on: 11 May 2009, 14:07 »
What about if i wanted to vent to atmosphere.. would this be possibloe without the need for an additional plate.. there must be a send & recieve valve.. could i not just block the recive valve and use a silicon hose from the send valve & then vent to atmosphere
Logged

Offline andeep

  • Not said much yet
  • **
  • Posts: 52
Re: Catch Tank
« Reply #13 on: 13 May 2009, 13:51 »
Quote from: edition_30 on 11 May 2009, 14:07
What about if i wanted to vent to atmosphere.. would this be possibloe without the need for an additional plate.. there must be a send & recieve valve.. could i not just block the recive valve and use a silicon hose from the send valve & then vent to atmosphere

Take a read of this: http://forums.vwvortex.com/zerothread?id=4387972

Maybe that could be incorporated into some sort of vent to atmosphere? Otherwise I know BSH is working on a racing catch can that vents to the atmosphere.
Logged

Offline edition_30

  • Not said much yet
  • **
  • Posts: 41
Re: Catch Tank
« Reply #14 on: 13 May 2009, 15:55 »
Thanks for the link mate... very interesting read... im looking at simply running a hose from the pcv down to the bottom of the car to get rid of the excess oil. Any ideas if not using a vacuum to eliminate the crankcase gases would cause a problem. I ran this setup on my putno & it worked fine
Logged

Offline RedRobin

  • Forum addict
  • *
  • Posts: 4,227
  • BIALI Motorsport - Chief Horn Blower!
Re: Catch Tank
« Reply #15 on: 13 May 2009, 16:04 »
Quote from: edition_30 on 13 May 2009, 15:55

Thanks for the link mate... very interesting read... im looking at simply running a hose from the pcv down to the bottom of the car to get rid of the excess oil. Any ideas if not using a vacuum to eliminate the crankcase gases would cause a problem. I ran this setup on my putno & it worked fine


....That's nice of you! Oil on the road - A very responsible and considerate action! :rolleyes:

And please don't try and tell me that it's a negligable amount - Try telling that to the cyclist or motorbiker who goes down on a roundabout and then gets crushed by the truck behind (as happened to a friend I once knew).
Logged
:cool: FACEFOOK: https://www.facebook.com/robin.procter.50?ref=tn_tnmn



Throbbin' Red VeeDub GTI Mk5 - DSG, Custom Milltek TBE, Forge Twintake, KW-V3 + Eibach ARBs, AP Racing BigBrake kit, Quaife ATB diff, Revo2

Offline edition_30

  • Not said much yet
  • **
  • Posts: 41
Re: Catch Tank
« Reply #16 on: 13 May 2009, 18:36 »
Fair play.. what if i were to route the oil to a tank then.. would the lack of vacuum for the crankcase gasses cause a problem?
Logged
Pages: 1 [2]
« previous next »