Author Topic: smoothed air boxa  (Read 2659 times)

Offline nadlad

  • I live here
  • *****
  • Posts: 1,434
  • Building Surveyor MRICS
smoothed air boxa
« on: 24 March 2009, 12:50 »
anyone go ta pic of a smoother air bo i just put my pipercross in and noticed the box is more or less smoothed except for a 2 tiny triangular plastic tabs on the side and a 3 mm lip along the bottom which if u clip off will make fack all difference?

cheers


.........................................
<<<Big Build Thread>>>

Offline Rhyso

  • Global Moderator
  • Sir Postalot
  • *****
  • Posts: 26,687
Re: smoothed air boxa
« Reply #1 on: 24 March 2009, 12:52 »

Offline nadlad

  • I live here
  • *****
  • Posts: 1,434
  • Building Surveyor MRICS
Re: smoothed air boxa
« Reply #2 on: 24 March 2009, 12:56 »
excellent so does the 3mm lip make all the difference?


.........................................
<<<Big Build Thread>>>

Offline Rhyso

  • Global Moderator
  • Sir Postalot
  • *****
  • Posts: 26,687
Re: smoothed air boxa
« Reply #3 on: 24 March 2009, 12:59 »
excellent so does the 3mm lip make all the difference?

it makes more noise thats about it to be honest

as pointed out by Dai though the reason the airboxes aren't smoothed are to collect all the debris that makes it as far as the airbox.  The lips are there to stop the debris going into the filter

Offline gjroe78

  • I live here
  • *****
  • Posts: 2,043
  • http://shop.ebay.co.uk/mattroe2007/m.html
Re: smoothed air boxa
« Reply #4 on: 24 March 2009, 13:05 »
excellent so does the 3mm lip make all the difference?

it makes more noise thats about it to be honest

as pointed out by Dai though the reason the airboxes aren't smoothed are to collect all the debris that makes it as far as the airbox.  The lips are there to stop the debris going into the filter

So in other words it will do more harm than good ? ? ?
<br /><br />+ a 1.8T Bora Sport(R-Tech\'ed to 213bhp)

Offline nadlad

  • I live here
  • *****
  • Posts: 1,434
  • Building Surveyor MRICS
Re: smoothed air boxa
« Reply #5 on: 24 March 2009, 13:05 »
oh right i opened mine today and i looked at it and i thought wot the f**ks the point of clipping them off???? its gonna make no difference at all?????. but the debris what happenes if it goes in the engine coz the box was cluttered with dried bits of leaves and little bits, can they not go any further on from the box or do they go in the engine?


.........................................
<<<Big Build Thread>>>

Offline Rhyso

  • Global Moderator
  • Sir Postalot
  • *****
  • Posts: 26,687
Re: smoothed air boxa
« Reply #6 on: 24 March 2009, 13:15 »
excellent so does the 3mm lip make all the difference?

it makes more noise thats about it to be honest

as pointed out by Dai though the reason the airboxes aren't smoothed are to collect all the debris that makes it as far as the airbox.  The lips are there to stop the debris going into the filter

So in other words it will do more harm than good ? ? ?

its quite possible  :undecided: though i've done over 10K since and not had any problems..........

the bits don't go any further as thats what the filter is there for - what does seem to happen is the filter clogs up more quickly as there's nothing stopping the majority of the debris getting to the filter

Offline iMation

  • I live here
  • *****
  • Posts: 778
  • G SiXtY
Re: smoothed air boxa
« Reply #7 on: 24 March 2009, 13:28 »
I have "Smoothed" my air box and put a piperX filter in, i every few weeks, take it out, give it a good bang and remove any dirt or dust from it. this keeps it clean.

Ive not had a problem with mine either
Meh....