« previous next »
Pages: [1]

Author Topic: Cold Air Intake  (Read 1971 times)

Offline Payne

  • Not said much yet
  • **
  • Posts: 89
Cold Air Intake
« on: 10 March 2009, 18:16 »
Hey guys,

2 days ago I bought a Cold air intake from Toyosports but I don't know how to install it.
Does somebody have some pictures or guidelines how to intall a cold air intake

I got a 2001 Golf 1.8 Turbo Highline
Thnx in advance!


Logged

Offline barry-gti

  • I live here
  • *****
  • Posts: 2,016
Re: Cold Air Intake
« Reply #1 on: 10 March 2009, 21:03 »
bav and i (me mostly standing around) done mine today. we had to take the bumper off and take the battery out and stuff. it was kinda long winded so if your not a very mechanical person i would probably take it to a garage
Logged

Offline golfgtidan

  • I live here
  • *****
  • Posts: 619
Re: Cold Air Intake
« Reply #2 on: 10 March 2009, 21:09 »
i did mine by just taking out battery tray..  :smiley:
Logged


1999 1.8t : Winter Pack : Kamei Mesh Grille : Forge 007p D/V : Carbonio Cold Air Intake : R-tech remap : 18" Toora Alloys : -30mm Eibach Springs : Smoked Side Repeaters : Hella Magic Colours Rear Lights : Hella Black Headlights : "hid" Headlight Conversion : Aero Blades Front & Rear: ECS KVW100 Window Control Module : Milltek resonated cat back

Offline northeast_gti-t

  • Serious forum addict
  • *
  • Posts: 6,554
  • "1.8T AGU"
Re: Cold Air Intake
« Reply #3 on: 10 March 2009, 21:18 »
as said by removing your front bumper and battery/tray this gives you enough room to feed the pipe into the engine bay far easier that way to :wink:
Logged
2000 Mkiv GTi 1.8T AGU

Offline Payne

  • Not said much yet
  • **
  • Posts: 89
Re: Cold Air Intake
« Reply #4 on: 10 March 2009, 21:21 »
How did you do it gtidan
Or does someone have any pictures so I can see what I need to do.

I'm prety mechanical but I'm woundering if it all fit's, cause I can't take the whole tube
of the filter off. It's got that sensor for how much air will go in and out etc. Dunno how to explain in English.

So any guidelines, how to's or photos would be great!

Logged

Offline golfgtidan

  • I live here
  • *****
  • Posts: 619
Re: Cold Air Intake
« Reply #5 on: 10 March 2009, 21:42 »
i pretty much followed the instructions...  :laugh:
i also had to remove my air box........ makes sence since its that that your replacing...  :rolleyes:

these any help.... some pics i took while doing it



« Last Edit: 10 March 2009, 22:50 by golfgtidan »
Logged


1999 1.8t : Winter Pack : Kamei Mesh Grille : Forge 007p D/V : Carbonio Cold Air Intake : R-tech remap : 18" Toora Alloys : -30mm Eibach Springs : Smoked Side Repeaters : Hella Magic Colours Rear Lights : Hella Black Headlights : "hid" Headlight Conversion : Aero Blades Front & Rear: ECS KVW100 Window Control Module : Milltek resonated cat back

Offline Payne

  • Not said much yet
  • **
  • Posts: 89
Re: Cold Air Intake
« Reply #6 on: 10 March 2009, 22:03 »
I didn't get any instructions, bought it via ebay.
So I can't follow anything right now hehe

Thnx for the photo's looking good! I'm woundering if my tube will fit!

Here's a link of the 1 I bought
http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&item=200313290692&ssPageName=ADME:B:EOIBSA:NL:11#ebayphotohosting
Logged

Offline perd999

  • Here all the time
  • ****
  • Posts: 325
Re: Cold Air Intake
« Reply #7 on: 11 March 2009, 12:55 »
I did mine by just taking the battery out, althoug taking the bumper off makes things a lot easier i would have thought. Then all battery tray has to come off and one other plastic bracket thats attched near the headlights by rivots - after that it should slot in after a bit of swearing and knuckle scrapping!!!  :evil:

Hope all goes well!!
Logged

Offline Payne

  • Not said much yet
  • **
  • Posts: 89
Re: Cold Air Intake
« Reply #8 on: 11 March 2009, 20:04 »
Did you leave the headlights in?
Did you check my tube?
Logged
Pages: [1]
« previous next »