« previous next »
Pages: 1 [2] 3 4

Author Topic: 312mm carriers  (Read 4961 times)

Offline jonnyturbo

  • Forum addict
  • *
  • Posts: 4,806
Re: 312mm carriers
« Reply #10 on: 06 March 2009, 13:52 »
does the 256mm discs fit strait on the back with no mods?
Logged
Gone but still keeping a close eye on it...

Mk4 golf 1.8t AUM Hybrid K03s. Custom Mapped by R-tech to 260bhp. CR hybrid turbo Audi TT injectors / fuel pump, Forge tip,THS FMIC,Carbonio CAI, Full milltek turbo back, N249 bypass, Fully poly bushed, Weitec coils. Genuine R32 front bumper and Genuine R-line rear, Genuine Porsche twists, Anniversary black interior.

Offline Ivor Mk4 Turbo

  • Forum addict
  • *
  • Posts: 4,576
  • 2014 PP GTi Manual
Re: 312mm carriers
« Reply #11 on: 06 March 2009, 13:56 »
Quote from: jonnyturbo on 06 March 2009, 13:52
does the 256mm discs fit strait on the back with no mods?


It's a bolt on mod, BUT.................  unlike the fronts, you need to change the calipers as well as the carriers, which in turn, means you need to disconnect the brake lines & bleed them etc.. ;)
Logged
Current Car:- 2014 GTI PP manual, white.

Make way for..... 'The Silver Bullet'! 227 bhp, KO3-S'd AGU, R-TECH Spec 2 map 8), Forge 007P, Blueflame Turbo-back, Eibach -30mm's, YellowStuff front/RedStuff rear pads, Goodridge braided lines, TT Short-shifter, R32 Dogbone, TT W/B bushes, Forge TIP, G60 fly/VR6 clutch, 5.5 ltr washer bottle,

Car now for sale >>> http://www.golfgtiforum.co.uk/index.php?topic=140614.0

Offline jonnyturbo

  • Forum addict
  • *
  • Posts: 4,806
Re: 312mm carriers
« Reply #12 on: 06 March 2009, 13:58 »
thankx ivor. What do i need to do to get the 312mm on the front mate?
Logged
Gone but still keeping a close eye on it...

Mk4 golf 1.8t AUM Hybrid K03s. Custom Mapped by R-tech to 260bhp. CR hybrid turbo Audi TT injectors / fuel pump, Forge tip,THS FMIC,Carbonio CAI, Full milltek turbo back, N249 bypass, Fully poly bushed, Weitec coils. Genuine R32 front bumper and Genuine R-line rear, Genuine Porsche twists, Anniversary black interior.

Offline Ivor Mk4 Turbo

  • Forum addict
  • *
  • Posts: 4,576
  • 2014 PP GTi Manual
Re: 312mm carriers
« Reply #13 on: 06 March 2009, 13:59 »
Quote from: Pete H on 06 March 2009, 09:42
Also have them on the V5 golf!


The 150 AND the 170, or just the later 170?   :undecided:
Logged
Current Car:- 2014 GTI PP manual, white.

Make way for..... 'The Silver Bullet'! 227 bhp, KO3-S'd AGU, R-TECH Spec 2 map 8), Forge 007P, Blueflame Turbo-back, Eibach -30mm's, YellowStuff front/RedStuff rear pads, Goodridge braided lines, TT Short-shifter, R32 Dogbone, TT W/B bushes, Forge TIP, G60 fly/VR6 clutch, 5.5 ltr washer bottle,

Car now for sale >>> http://www.golfgtiforum.co.uk/index.php?topic=140614.0

Offline Ivor Mk4 Turbo

  • Forum addict
  • *
  • Posts: 4,576
  • 2014 PP GTi Manual
Re: 312mm carriers
« Reply #14 on: 06 March 2009, 14:04 »
Quote from: jonnyturbo on 06 March 2009, 13:58
thankx ivor. What do i need to do to get the 312mm on the front mate?


Easy, mate.  I did a mini-guide on a thread, once, but good look finding that, LOL. :D  There will be loads around, though. ;)  uk-mkivs/vortex etc. :)

7mm hex socket for the caliper slider bolts, 18mm socket for the carrier bolts & either phillips or torx screwdriver depending on how old your brake disc screws are.
Logged
Current Car:- 2014 GTI PP manual, white.

Make way for..... 'The Silver Bullet'! 227 bhp, KO3-S'd AGU, R-TECH Spec 2 map 8), Forge 007P, Blueflame Turbo-back, Eibach -30mm's, YellowStuff front/RedStuff rear pads, Goodridge braided lines, TT Short-shifter, R32 Dogbone, TT W/B bushes, Forge TIP, G60 fly/VR6 clutch, 5.5 ltr washer bottle,

Car now for sale >>> http://www.golfgtiforum.co.uk/index.php?topic=140614.0

Offline bobbarley

  • Serious forum addict
  • *
  • Posts: 7,614
  • I'm kind of a big deal...
Re: 312mm carriers
« Reply #15 on: 06 March 2009, 14:46 »
Quote from: Wazzzer on 06 March 2009, 13:23

If you find an Octy Mk1 VRS get the 256mm rears for yourself too  :wink:

To give to me!!
Logged

Offline jonnyturbo

  • Forum addict
  • *
  • Posts: 4,806
Re: 312mm carriers
« Reply #16 on: 06 March 2009, 14:49 »
i would bob if u will sell me ur liquids
Logged
Gone but still keeping a close eye on it...

Mk4 golf 1.8t AUM Hybrid K03s. Custom Mapped by R-tech to 260bhp. CR hybrid turbo Audi TT injectors / fuel pump, Forge tip,THS FMIC,Carbonio CAI, Full milltek turbo back, N249 bypass, Fully poly bushed, Weitec coils. Genuine R32 front bumper and Genuine R-line rear, Genuine Porsche twists, Anniversary black interior.

Offline bobbarley

  • Serious forum addict
  • *
  • Posts: 7,614
  • I'm kind of a big deal...
Re: 312mm carriers
« Reply #17 on: 06 March 2009, 14:51 »
Quote from: jonnyturbo on 06 March 2009, 14:49
i would bob if u will sell me ur liquids
I went to DHL earlier today and picked up four packages  :cool:
Logged

Offline jonnyturbo

  • Forum addict
  • *
  • Posts: 4,806
Re: 312mm carriers
« Reply #18 on: 06 March 2009, 14:59 »
grr
Logged
Gone but still keeping a close eye on it...

Mk4 golf 1.8t AUM Hybrid K03s. Custom Mapped by R-tech to 260bhp. CR hybrid turbo Audi TT injectors / fuel pump, Forge tip,THS FMIC,Carbonio CAI, Full milltek turbo back, N249 bypass, Fully poly bushed, Weitec coils. Genuine R32 front bumper and Genuine R-line rear, Genuine Porsche twists, Anniversary black interior.

Offline jonnyturbo

  • Forum addict
  • *
  • Posts: 4,806
Re: 312mm carriers
« Reply #19 on: 06 March 2009, 15:52 »
just phoned scrappie thez wont sell me just the carriers. Bummer.  Will cost me £250 for TT carriers, TT discs TT pads and flexis what ever them are. What u ppl think?
Logged
Gone but still keeping a close eye on it...

Mk4 golf 1.8t AUM Hybrid K03s. Custom Mapped by R-tech to 260bhp. CR hybrid turbo Audi TT injectors / fuel pump, Forge tip,THS FMIC,Carbonio CAI, Full milltek turbo back, N249 bypass, Fully poly bushed, Weitec coils. Genuine R32 front bumper and Genuine R-line rear, Genuine Porsche twists, Anniversary black interior.
Pages: 1 [2] 3 4
« previous next »