Hello new owner and a question

[SeaGolf]

Hi,

Hello to you all from a new GTi owner/forum member.

Apologies for starting with a question...

Just picked up a 1990 8V Big Bumper in graphite which needs a bit of tlc but is worth saving. I have removed front and rear bumpers but the metalwork inside the bumpers that holds them to the car (called bumper irons I think) has rotted beyond repair. As the plastic painted part of the bumpers is fine can I get just the bumper irons and of so where from/how much.

Any pointers gratefully received.

Thanks

[Mk2George]

Hi and welcome

I dont think you can get these parts seperately (could be wrong) but you might have to end up getting a used set of bumpers from good old ebay and using them or transferring the metalwork into your bumpers if possible.

Sorry I couldnt be more help but ive never seem the metalwork sold seperately

Cheers Tim

[DarnPB]

The bumpers inners may still be available from VW, but you will pay for them. Alternatavly, get then from a scrapyard and just change the covers. With mu car, it was the other way round. The covers were horrible so I bought genuine covers fron VW, got them painted and fitted them. Its not a bad job to do. Just don't lose the wedges as you will need all of them.

[rubjonny]

you can get the irons from VW, but the main one alone is  £80+VAT!  also be aware that gen vag and aftermarket bumpers have different bumper irons too

[muppet]

ive go the same problem but im having to source another whole bumper (£30 ) so it can be resprayed instead of getting the metal bar!!! silly hassles cos ive got two big bumpers but they both join to the plastic bumper in different ways!!!!