« previous next »
Pages: [1]

Author Topic: compression test  (Read 1536 times)

Offline davidgtrr34

  • Here all the time
  • ****
  • Posts: 308
compression test
« on: 25 January 2014, 15:22 »
I have no power and a knocking noise. the noise gets louder when I rev it and stops when I let off the throttle.
I done a compression test and these are the results

cylinder 1 - 35psi
cylinder 2 - 30psi
cylinder 3 - 30psi
cylinder 4 - 30psi

the car still starts and runs.
can anyone help?
Logged
2004 auq, 550cc injectors, gt3071r, adjustable fpr, ebc, fmic, sachs stage 2, walbro 255, 3" turbo back, 3" custom intake, n75 n249 sai delete.
http://s103.photobucket.com/user/davidgtrr34/media/Mobile%20Uploads/20140531_192129_zpsgud6vsfb.jpg.html

Offline maxey

  • Not said much yet
  • **
  • Posts: 29
Re: compression test
« Reply #1 on: 25 January 2014, 19:12 »
I have the same problem mate, does it shack like mad?
Logged

Offline davidgtrr34

  • Here all the time
  • ****
  • Posts: 308
Re: compression test
« Reply #2 on: 25 January 2014, 19:25 »
Not really.but im gettin alot of fault codes and no boost
Logged
2004 auq, 550cc injectors, gt3071r, adjustable fpr, ebc, fmic, sachs stage 2, walbro 255, 3" turbo back, 3" custom intake, n75 n249 sai delete.
http://s103.photobucket.com/user/davidgtrr34/media/Mobile%20Uploads/20140531_192129_zpsgud6vsfb.jpg.html

Offline rockmonkey69

  • I live here
  • *****
  • Posts: 937
Re: compression test
« Reply #3 on: 26 January 2014, 11:05 »
Those figures seem a tad low, very low. I'm surprised the engine is even running. Looks like its time for a rebuild, new engine or new car
Logged

Offline xxChrisxx

  • GTI forum regular
  • ***
  • Posts: 213
Re: compression test
« Reply #4 on: 26 January 2014, 11:23 »
Those values are too low to be real. I'd try doing again with a different gauge.

Working order is approx 12.5 bar.
Wear limit is 7 bar.

For anything to be massively below that the timing has to be out, allowing one of the valves to be open.
Logged

Offline davidgtrr34

  • Here all the time
  • ****
  • Posts: 308
Re: compression test
« Reply #5 on: 26 January 2014, 13:19 »
Ill test again with a different kit. The timing seems to be fine
Logged
2004 auq, 550cc injectors, gt3071r, adjustable fpr, ebc, fmic, sachs stage 2, walbro 255, 3" turbo back, 3" custom intake, n75 n249 sai delete.
http://s103.photobucket.com/user/davidgtrr34/media/Mobile%20Uploads/20140531_192129_zpsgud6vsfb.jpg.html

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: compression test
« Reply #6 on: 26 January 2014, 20:49 »
I would get another gauge and try again
Logged
Pages: [1]
« previous next »