« previous next »
Pages: 1 2 [3]

Author Topic: Which discs and pads?  (Read 4997 times)

Offline Rhyso

  • Global Moderator
  • Sir Postalot
  • *****
  • Posts: 26,720
Re: Which discs and pads?
« Reply #20 on: 13 November 2013, 08:33 »
Quote from: D1andonlyantman on 13 November 2013, 00:58
On eurocar parts it's was 20 each rear disc, 35 each front. Then the pads. I got everything for 189. Seemed like a fair deal

Ah thought you had only bought the fronts!! Not the full set.....as you stated it was the fronts that needed replacing
Logged

Offline D1andonlyantman

  • GTI forum regular
  • ***
  • Posts: 143
Re: Which discs and pads?
« Reply #21 on: 13 November 2013, 14:01 »
Ah I see. Nah, the whole lot
Logged
MKIV AUQ - RamAir Induction Kit, Forge007p, (Custom Exhaust, Decent TIP, N249 Bypass and remap coming soon)

TRASHED BY SOME BELLEND WHO CANT DRIVE

Replaced with Leon Cupra 225, RamAir CAI, Forge 007p, Badger5 TIP, N249 bypass, Scorpion Decat and Catback, R-tech remap pushing approx 275bhp :-)

Offline paulhgti

  • GTI forum regular
  • ***
  • Posts: 226
  • GOLF 1.8T AUM 209bhp 228LB FT TORQUE
Re: Which discs and pads?
« Reply #22 on: 16 November 2013, 21:15 »
I have ebc green stuff pads and ultimax grooved discs they are pretty good and no brake dust
Logged

AUM 209 BHP R-TECH STAGE 1 RE MAP,MILTEK CAT BACK 4MOTION EXHAUST,4MOTION VALANCES,PIPERCROSS FILTER,TINTS,WIND DEFLECTORS,BOOST LEAK,SANTA MONICA ALLOYS,35mm H&R LOWERING SPRINGS

Offline D1andonlyantman

  • GTI forum regular
  • ***
  • Posts: 143
Re: Which discs and pads?
« Reply #23 on: 19 November 2013, 19:10 »
My mate just went to stick on the discs and said that I need vented on the rear and the solid brembos I've got won't fit. Does that mean the rear brakes have been modded? On the eurocarparts website it says solids on the rear and these were definitely advertised for my model.

Thanks
Logged
MKIV AUQ - RamAir Induction Kit, Forge007p, (Custom Exhaust, Decent TIP, N249 Bypass and remap coming soon)

TRASHED BY SOME BELLEND WHO CANT DRIVE

Replaced with Leon Cupra 225, RamAir CAI, Forge 007p, Badger5 TIP, N249 bypass, Scorpion Decat and Catback, R-tech remap pushing approx 275bhp :-)

Offline dom

  • 10k hero
  • *
  • Posts: 10,084
  • Back in a Mk4
Re: Which discs and pads?
« Reply #24 on: 19 November 2013, 19:35 »
Quote from: D1andonlyantman on 19 November 2013, 19:10
My mate just went to stick on the discs and said that I need vented on the rear and the solid brembos I've got won't fit. Does that mean the rear brakes have been modded? On the eurocarparts website it says solids on the rear and these were definitely advertised for my model.

Thanks

If yours is an AUQ (which I'm guessing from your sig) then you'll have 256mm vented rears as standard.
Logged

Offline D1andonlyantman

  • GTI forum regular
  • ***
  • Posts: 143
Re: Which discs and pads?
« Reply #25 on: 19 November 2013, 19:48 »
Dammit. Both eurocarparts and the place I bought them from both lied. Bloody irritating. Try and do the research but still get the wrong bloody bit. Well now I know. Cheers mate
Logged
MKIV AUQ - RamAir Induction Kit, Forge007p, (Custom Exhaust, Decent TIP, N249 Bypass and remap coming soon)

TRASHED BY SOME BELLEND WHO CANT DRIVE

Replaced with Leon Cupra 225, RamAir CAI, Forge 007p, Badger5 TIP, N249 bypass, Scorpion Decat and Catback, R-tech remap pushing approx 275bhp :-)

Offline dom

  • 10k hero
  • *
  • Posts: 10,084
  • Back in a Mk4
Re: Which discs and pads?
« Reply #26 on: 19 November 2013, 19:54 »
If you bought them from ECP then take them back. AUQ has 312mm front and 256mm vented rear as standard  :wink:
Logged

Offline barrym381

  • Forum addict
  • *
  • Posts: 5,933
Re: Which discs and pads?
« Reply #27 on: 19 November 2013, 19:58 »
Quote from: dom on 19 November 2013, 19:54
If you bought them from ECP then take them back. AUQ has 312mm front and 256mm vented rear as standard  :wink:
then order them from carparts4less get them cheaper  :smiley:
Logged
Pages: 1 2 [3]
« previous next »