« previous next »
Pages: 1 [2]

Author Topic: Catch can hose size  (Read 1697 times)

Offline 150+

  • GTI forum regular
  • ***
  • Posts: 186
Re: Catch can hose size
« Reply #10 on: 02 July 2013, 13:51 »
The pipe I can find it the fittings I can't
Logged

Offline Jin_C

  • GTI forum regular
  • ***
  • Posts: 113
Re: Catch can hose size
« Reply #11 on: 02 July 2013, 14:14 »
http://www.ebay.co.uk/itm/BRASS-BSP-Taper-x-Hosetail-Fitting-Connector-Fuel-Pipe-/250809147057?var=&hash=item3a6563deb1

Check out that item, if Jamie is correct you need to select 1/2" BSPT x 3/4" (19mm). However I have a feeling that the thread side (1/2" BSPT) would be too big.

19mm is ideal because that is the size of the pipe that comes out of the rocker cover. So there will be no restrictions in the system if you stick to that throughout. However saying that I have used all 19mm pipes and fitted reducers right before the pipes connect to the catch can input/output that are 15mm. Still works fine for me and collects a decent amount of water/oil

Logged
1.8T AGU, K03s, 007p, pipercross panel filter, G60 + VR6 clutch and flywheel, silicone TIP, decat + boost hoses, JOM coilovers

jamie16v

  • Guest
Re: Catch can hose size
« Reply #12 on: 02 July 2013, 15:36 »
^ :wink:
Logged
Pages: 1 [2]
« previous next »