Two questions :)

[Dave_IOW]

Has anyone else removed their aircon from their AGU, if so, can you remember what sized belt you used as a replacement? The measurement we got was 1110mm tonight by measuring round the pulleys, be interesting to know what you used.

02J differential bearings, anyone know what you actually measure to make sure the right ones are bought from the dealer? The difference on ETKA is 0.1mm, which sounds small, but when looking to shim as little as possible, is actually quite substantial!

[Dave_IOW]

These are the bearings that have been removed from the diff casing, 90% sure the options on ETKA were 16.5mm and 16.6mm, which clearly don't correspond with anything on here.

We have given it a go over with digital vernier, and the closest figure, 17.5mm seems correct. I guess ETKA wouldn't be out on the sizes for both bearings either.

Hopefully my memory has served me incorrectly, and it was indeed 17.5mm on ETKA. Pretty damned sure I'm right though.

[Wazzzer]

Dave give me an idea where to search and I'll have a look on ETKA

[Dave_IOW]

There's 2 listed on ETKA mate, that's the problem

Have the SKF bearing came out pictured about but it has no 16.5/6 measurement that matches up with anything.

On ETKA it's actually in the Diffrential bit itself, have the part number, just need to know which one to go with

[Wazzzer]

As per your project thread, have you tried a company called CTS?

http://www.gearboxman.co.uk/

Big in the Ford world and a very knowledgeable bloke

[Dave_IOW]

As per your project thread, have you tried a company called CTS?

http://www.gearboxman.co.uk/

Big in the Ford world and a very knowledgeable bloke

Will have a gander mate, thanking you