« previous next »
Pages: [1]

Author Topic: Which TIP  (Read 973 times)

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Which TIP
« on: 04 July 2012, 09:07 »
which TIP do people use when running a K03s and a 3'' MAF?
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline pickles

  • I live here
  • *****
  • Posts: 769
  • Next!!!
Re: Which TIP
« Reply #1 on: 04 July 2012, 11:39 »
usually a silicone TIP m8 ie forge, just make sure you get the right 1 for your engine, you may need to block off some holes as i did if your on an AGU

Logged
weirdos on here i tell you ;)
mk4 golf 1.8T, AGU, CAI, Forge007p DV,TIP,Decat, Bilsteins with Koni springs dropped 40mm
Mapped

Nearly S3 time  :)

Offline DunnDeal12

  • Limited
  • I live here
  • *
  • Posts: 704
Re: Which TIP
« Reply #2 on: 04 July 2012, 11:42 »
just use x2 80-70mm reducers for either side of the maf then a 70mm aluminium coupler to connect the tip.
Logged

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Which TIP
« Reply #3 on: 04 July 2012, 13:20 »
Quote from: DunnDeal12 on 04 July 2012, 11:42
just use x2 80-70mm reducers for either side of the maf then a 70mm aluminium coupler to connect the tip.


this was my plan, but as I havent bought the silicone TIP was wondering if there was one with a 3'' end, cheers
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline jamie1989

  • I live here
  • *****
  • Posts: 1,174
Re: Which TIP
« Reply #4 on: 04 July 2012, 13:28 »
No unless its custom made you wont get one that 3inch.
Just use joiners I assume thats what others do and its what im goin to do.
Logged
1.6-1.8t AGU K03s, Forge actuator, Forge 007p, turbo back exhuast, Ths front mount, Catch can, 5 piece silicone boost pipes and creation sports tip. Stage 2 atm 232bhp 270lbs. Waiting for custom mapping :-)

Offline DunnDeal12

  • Limited
  • I live here
  • *
  • Posts: 704
Re: Which TIP
« Reply #5 on: 04 July 2012, 15:03 »
or you could buy one of these http://www.creationsmotorsport.com/product-detail.php?pid=421 and get a aluminium part machined to fit the turbo.
Logged
Pages: [1]
« previous next »