Interior Sensor Fault

[benmanc]

My alarm keeps going off and its starting to do my head in.  It could be a problem with my door lock module as that needs replacing but im also getting code 01135.

I found a page on mkIV's which says...

When the alarm has gone off you can find out what set it off by using VAG-COM.  Go into the CCM (address 46) and look at measuring group 16.

Now, I dont understand what this measuring group 16 means?  What do I go on once im on the CCM module on the programme?

[Ant1981]

01135 - Interior Monitoring Sensors: Open Circuit
Possible Causes

    Wiring/Connector from/to Interior Monitoring Sensors faulty
    Interior Monitoring Sensors not installed

Possible Solutions

    Check/Repair Wiring/Connector from/to Interior Monitoring Sensors
        See Measuring Blocks
    Check Interior Monitoring Sensors Installation

[benmanc]

Will have a look although not a clue what to look for on the connections or where the other end goes

[rhys1927]

Also check that your rear washer jet isn't leaking.

The leak can cause the alarm to continuously go off!

[benmanc]

Its a fault with the interior sensor not the boot sensor.