Scanning car noob

[benmanc]

I scanned my car the other day as I had a boost leak which I have now sorted.  I have an ebay usb cable with the free version of vag com.

It had this below when I scanned it.  I think its not showing what the faults are as its the free version?  Is that correct?  and does anybody know what the faults are from what it shows below?




 VCDS-Lite Version: Release 1.1
Saturday, 02 July 2011, 08:58:09.


Chassis Type: 1J - VW Golf/Bora IV
Scan: 01,02,03,08,15,16,17,19,22,29,35,36,37,39,46,47,55,56,57,75,76
 
-------------------------------------------------------------------------------
Address 01: Engine       Labels: Redir Fail!
   Controller: 06A 906 018 CG
   Component: 1.8L R4/5VT MOTR HS D02
   Coding: 04000
   Shop #: WSC 00028
   VCID: 69A53EA70077
No fault code found.
Readiness: N/A

-------------------------------------------------------------------------------
Address 03: ABS Brakes       Labels: 1J0-907-37x-ABS.LBL
   Controller: 1J0 907 379 Q
   Component: ABS/EDS 20 IE CAN  0001
   Coding: 13504
   Shop #: WSC 00028
   VCID: 3FF1C0FF2E73
No fault code found.

[jamie16v]

from what i can see, there are no faults, appart from what i imagine would be a link error 

[Big Tone]

It says no fault code found.

It does however only show the first two modules, I presume that you are using the autoscan faculty and its booting you out after scanning address 3. Yes?

Have you tried scanning the modules individually?