« previous next »
Pages: [1]

Author Topic: ABS LED Bulb  (Read 1604 times)

Offline Asbo Sovfinger

  • GTI forum regular
  • ***
  • Posts: 106
  • I drink your milkshake!!
ABS LED Bulb
« on: 10 July 2009, 17:41 »
Hey all,

Anyone know what LED is need for the ABS light?  The bulb in mine appears to have been crushed so needs replacing.

Cheers, Ed
Logged
'06 Ford Mondeo ST TDCi estate - Machine Silver with full leather Recaro interior (Black)

Offline Adam

  • Forum addict
  • *
  • Posts: 5,194
Re: ABS LED Bulb
« Reply #1 on: 10 July 2009, 18:25 »
Thats the start of bad things, someone has crushed it for a reason...i.e ABS light is on.

Good luck with that,
Logged

Down Hill From Here.

Offline funkyfive

  • I live here
  • *****
  • Posts: 595
Re: ABS LED Bulb
« Reply #2 on: 10 July 2009, 19:54 »
Sounds like the same problem i had, i got a new unit from a breakers yard for 8 quid.
Logged

Offline doely85

  • GTI forum regular
  • ***
  • Posts: 115
Re: ABS LED Bulb
« Reply #3 on: 11 July 2009, 15:50 »
its easier to replace the unit, take the old unit out and it will have a part number on the side, type that into ebay and some should come up, got one  last week for a tenner
Logged

adamrob69

  • Guest
Re: ABS LED Bulb
« Reply #4 on: 11 July 2009, 16:23 »
my bulb has actually blown for some reason, you carnt change the bulb on its own as its attached to its housing which is soldered to the board. best bet is as said change the whole unit, unless you have your own LEDs lying about and a solder iron
Logged

ianw3321

  • Guest
Re: ABS LED Bulb
« Reply #5 on: 12 July 2009, 16:26 »
My abs light does not come on at all. Do you think I need one of these also?
Logged

Offline funkyfive

  • I live here
  • *****
  • Posts: 595
Re: ABS LED Bulb
« Reply #6 on: 12 July 2009, 19:06 »
Logged

ianw3321

  • Guest
Re: ABS LED Bulb
« Reply #7 on: 13 July 2009, 12:15 »
How do you get this little panel off? Prise with a screwdriver?
Logged

Offline funkyfive

  • I live here
  • *****
  • Posts: 595
Re: ABS LED Bulb
« Reply #8 on: 13 July 2009, 12:51 »
Yes mate, i used a fine flat head.
Logged
Pages: [1]
« previous next »