« previous next »
Pages: [1]

Author Topic: Rear Brake Guard?  (Read 1463 times)

Offline chrisf70

  • Not said much yet
  • **
  • Posts: 36
Rear Brake Guard?
« on: 13 March 2009, 18:53 »
Hi,

I've had a vibration for the past couple of weeks that I thought might be a heat shield etc loose and vibrating at a certain rev level, lift off point.

Washing the car today I found what it is, I think it's this bit below. The rear brake guard(?) if that's what it's called. It has come away from it's mounting, or it's corroded so badly it has sheared off (the area circled in yellow). Also I had the rear wheel bearings tightened about four weeks ago, could this be a part that hasn't been fitted correctly again?

Looked in the Haynes manual and can't find anything specific for it.

Does anyone know what it is, what it should be attached to, easy to fit another, and is it safe to drive still? Cheers.  :smiley:

Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Rear Brake Guard?
« Reply #1 on: 13 March 2009, 19:19 »
All it really does is save the disc from being hit by stones etc, it will be ok to drive and is easy to replace.
Logged

Offline Guy

  • Forum addict
  • *
  • Posts: 6,118
Re: Rear Brake Guard?
« Reply #2 on: 14 March 2009, 00:12 »
what rev level? 2.5k... that'll be your heat shield
Logged

Offline chrisf70

  • Not said much yet
  • **
  • Posts: 36
Re: Rear Brake Guard?
« Reply #3 on: 14 March 2009, 00:28 »
I thought that, but that bit on the drivers side flops around like a paper plate, on the passenger side it's solid. So it must be that bit of old metal.
Logged

Offline Shady Pioneer

  • Serious forum addict
  • *
  • Posts: 8,670
  • graphic designer.
Re: Rear Brake Guard?
« Reply #4 on: 14 March 2009, 00:29 »
Have you just double checked the heatshield as well, to make sure there's no play in it?
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Rear Brake Guard?
« Reply #5 on: 14 March 2009, 09:02 »
I would check your heatshield under the cat as well, mine was rattling due to the mount being broken.
Logged

Offline Khare

  • Serious forum addict
  • *
  • Posts: 7,627
  • The bear that khares
Re: Rear Brake Guard?
« Reply #6 on: 14 March 2009, 10:54 »
Quote from: Guy on 14 March 2009, 00:12
what rev level? 2.5k... that'll be your heat shield
must be an astronomically common problem then  :grin: mine vibrates like mad at 2.5k rpm.
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Rear Brake Guard?
« Reply #7 on: 14 March 2009, 12:19 »
Quote from: kharekatoh on 14 March 2009, 10:54
Quote from: Guy on 14 March 2009, 00:12
what rev level? 2.5k... that'll be your heat shield
must be an astronomically common problem then  :grin: mine vibrates like mad at 2.5k rpm.

It is, mine was the same.
Logged

Offline Khare

  • Serious forum addict
  • *
  • Posts: 7,627
  • The bear that khares
Re: Rear Brake Guard?
« Reply #8 on: 14 March 2009, 12:27 »
Was it the downpipe heatshield for you? mine has come loose from the manifold - downpipe joint and is rattling around the downpipe.
Ive bought some jubilee clips that im gonna join together and i'l tighten them around the heatshield as much as possible, see if that sorts it.
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Rear Brake Guard?
« Reply #9 on: 14 March 2009, 12:29 »
Quote from: kharekatoh on 14 March 2009, 12:27
Was it the downpipe heatshield for you? mine has come loose from the manifold - downpipe joint and is rattling around the downpipe.
Ive bought some jubilee clips that im gonna join together and i'l tighten them around the heatshield as much as possible, see if that sorts it.

No mine was the one under the cat, most of the brackets were broke and everytime I bent it away from the cat I would knock it on a speedbump and bend it back.
Logged
Pages: [1]
« previous next »