Kenwod mask stereo question

[paddy_coyle]

Hi guys I have a kenwood mask in my mk3, ive had it while, I bought it off a guy that works wit my bro, he lost the manual, the question i have is, how do you set it so the name the artist and track name come up on screen??

many thanks

[troublestarter]

there should be a button on the front which you pres and hold and then you can enter the names of the album manually by using the disc up/down buttons
which model do you have exactly as i may have a copy of the user manual

[paddy_coyle]

Its KDC W707

Thanks

[pro-biotic]

http://images.kenwood.eu/files/images/products/product_id_93/file_category_24/KDC-W707_ENG.pdf

one manual

[troublestarter]

this section
Disc Naming (DNPS)
Attaching a title to a CD.
1 Play the disc you want to attach a name to
• A title cannot be attached to MD or Audio file media.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3 Select Name set mode
Push the Control knob towards [FM] or [AM].
Select the "Name Set" display.
4 Enter Name set mode
Press the Control knob for at least 1 second.
5 Move the cursor to the enter character
position
Push the Control knob towards [4] or
[¢].
6 Select the character type
Press the Control knob.
Each time you press the knob, the character type
alternates between the types shown in the table
below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
7 Select the characters
Push the Control knob towards [FM] or [AM].
8 Repeat steps 5 through 7 and enter the name.
9 Exit Menu mode
Press the [MENU] button.
• When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
• Media that you can attach a name to
- Internal CD player: 10 discs.
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• You can change the name of a CD by the same
operation you used to name it