Author Topic: Help identifying part  (Read 881 times)

Offline gamestaffords

  • Not said much yet
  • **
  • Posts: 60
Help identifying part
« on: 31 March 2013, 16:04 »
Hello,anyone no what this parts called and does please?think its leaking oil but dont no what its called to look into fixing it THANKS




Offline rio_gti

  • I live here
  • *****
  • Posts: 2,298
  • "i'm not spending any money on it" Got a Hybrid!
Re: Help identifying part
« Reply #1 on: 31 March 2013, 16:26 »
Is it this??



2000 GTI 1.8t ARZ, S2000 filter, DSG intake, Forge 007 dv, Catch can, R-tech custom remap, 3" Supersize Silicone TIP, Powerflex dog bone, 'The Beast' FMIC, Ultimate delete, LCR fuel pump, 3" Turbo back, K03 hybrid, Ported Manifold, S3 injectors, 80mm maf = 280bhp 270lbft :evil:

Offline gamestaffords

  • Not said much yet
  • **
  • Posts: 60
Re: Help identifying part
« Reply #2 on: 31 March 2013, 16:56 »
Yea think so mate,what is???

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Help identifying part
« Reply #3 on: 31 March 2013, 19:23 »
It's a combi valve mate, doesn't do much in all honesty get rid of it and do the SAI delete rather than take it off and put a new one on
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline gamestaffords

  • Not said much yet
  • **
  • Posts: 60
Re: Help identifying part
« Reply #4 on: 31 March 2013, 19:41 »
Thanks pal,  is this part likely to be the part leaking oil? it looks like its coming from there!!

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Help identifying part
« Reply #5 on: 31 March 2013, 21:23 »
No mate it wouldn't leak oil, where it connects to the block is where coolant is, so if it was to leak anything it would be coolant, it's more than likely the rocker gasket leaking that side  :wink:
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline gamestaffords

  • Not said much yet
  • **
  • Posts: 60
Re: Help identifying part
« Reply #6 on: 31 March 2013, 21:55 »
Thanks mate,, now next question lol rocker gasket BIG JOB????

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Help identifying part
« Reply #7 on: 01 April 2013, 08:36 »
Not at all, it's just a case of taking the bolts off, removing the head then removing the old gasket, clean the two surfaces and then refit gasket and put the rocker back on and tighten the bolts, think they are meant to be tightened to 10nm but I always tighten then nip them up, just don't do them too tight.

ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline gamestaffords

  • Not said much yet
  • **
  • Posts: 60
Re: Help identifying part
« Reply #8 on: 01 April 2013, 18:40 »
Thanks mate!!! got a torque wrench so will ok,, Thanks again