front wishbones

[danmusic24]

need to replace my wishbones,is it straight forward job or apain in the arse
mk3 16v?

[spudboy6]

Fairly simple job if your doing just arms is easier and just undoing the three ball joint nuts off the arm and leaving the ball joint in the hub .  If changing everything including balljoint its slightly trickier as will need a chisel to wedge in the hub to remove the ball joint

[AGGGTi]

Balljoints are abit different on a 5 stud (16v), tapered fit with a nut on top. Bit awkward to seperate, but a sharp blow with a hammer or use a balljoint splitter. But as above only required if changing balljoints