PLEASE HELP URGENTLY!!!!!!!!!

[(shakey)]

if not smack a multispline bit into it and try to get it out if not it may be a gear box out job to get to it properly

tried that to pal but like i say its the frick angel of it,will try the extractor tomorrow if that does work then its getting blown up   problem solved.

[(shakey)]

use a smaller socket and hammer it on, obviously replace the bolt

its hard to get a smaller socket as its on a slight angel so the socket wont sit right.

put the socket on extension bar and hit it that way, if by angle you mean you have to put socket on at angle? YES M8

other than that other choice is weld another bolt to it, mole grips, grind it and use stud extractor for remaining bit

cant do that either gearbox in the way looks like gearbox out which i do not want to do just for the frick sump 

[GTI.T]

all you need is a ball headed allen key and a spanner job done

[(shakey)]

all you need is a ball headed allen key and a spanner job done

i finally done it afta two days of trying to get the nut off 

[GTI.T]

well done when i done the oil pump that was a pain ok getting them off but putting everything back together was interesting lol

[(shakey)]

well done when i done the oil pump that was a pain ok getting them off but putting everything back together was interesting lol

lol i was the other way round hard to get off but easy to get back on what a pain