Author Topic: Golf iv 1.8t agu motor ,ignition amp module/amplifier  (Read 1863 times)

Offline donno

  • Not said much yet
  • **
  • Posts: 13
Golf iv 1.8t agu motor ,ignition amp module/amplifier
« on: 16 December 2011, 18:33 »
Hi Al

I would like to know if you should put thermal compound on the ignition amp when fitting the part back on the airbox.Many thanks for any advice.

jamie16v

  • Guest
Re: Golf iv 1.8t agu motor ,ignition amp module/amplifier
« Reply #1 on: 16 December 2011, 18:37 »
yes!

Offline blade4real2004

  • GTI forum regular
  • ***
  • Posts: 221
  • golf gti with a touch of .:R
Re: Golf iv 1.8t agu motor ,ignition amp module/amplifier
« Reply #2 on: 16 December 2011, 19:01 »
Yes that what I used helps with the transfer of heat
k04s | jabba cai | stage 2 (Rtech) | forge 007p | forge boost hose set |forge tip | THS fmic | gen r line kit | bbs ch | TT short shift | R32 vents | full stainless | decat | auto windows | mk5'd boot
need a scan or mod with vagcom & vagtacho PM ME (south wales area)
my build thread - http://uk-mkivs.net/forums/t/236415.aspx?PageIndex=1

Offline CarlGallagher

  • Not said much yet
  • **
  • Posts: 86
Re: Golf iv 1.8t agu motor ,ignition amp module/amplifier
« Reply #3 on: 16 December 2011, 20:12 »
DEFO!!!! lad i purchased my agu off did not put the heat conductive paste on and sure enough on a hot summers day it went.

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,172
  • Golf GTI 1.8T AGU
Re: Golf iv 1.8t agu motor ,ignition amp module/amplifier
« Reply #4 on: 16 December 2011, 20:58 »
yep and buy some good stuff too :wink:


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175