Hi y'all,
Just bought a 99 MK3 GTi 8v.
I am looking to do a slight mod for the audio that I previously performed on a similar set up in a 97 Saab 9000.
What I am looking to do is set up an AUX in on the cheap.
I already have a sony 10CD changer from the Saab, that I am hoping the golf HU will recognise (the Saab head is basically the same, but with minor interface differences - i.e. controls in slightly different places)
I am looking to install the changer via the Unilink and place a random CD in it, so that the HU will open the audio on the CD channel. This worked fine in the Saab.
Ok, so I have had a look at the back of the golf HU and there are no RCA phono plugs as there is no CD changer, but the sockets are there ready - all good.
My issues are -
There is already a Unilink connector connected to the HU - where is the likely location for the other end of this lead?
If it's in a convenient location, I should just be able to install the changer there (this is what In hope for).
Also, I have been told that the Unilink connector should just pull out from the HU. But, I seem to be using a lot of force to try and don't want to risk pulling the cable too much.
It also seems to have a collar that would maybe denote some pushing, pulling, turning action might be required..
Any help would be greatly appreciated.
KC
P.s. if you ever have to take of the plastic facia of one of these units be ready for the alarm inside the radio to go off. And don't let a VW dealer try and tell you it's the after market immobiliser!!! It can be reset by a micro switch inside the HU. 2 days of commuting with a piercing whine thanks to that dealer :-( Luckily I have ear plugs
