« previous next »
Pages: [1]

Author Topic: breather on a 2liter  (Read 1007 times)

Offline bazzza

  • Not said much yet
  • **
  • Posts: 86
breather on a 2liter
« on: 13 June 2009, 22:14 »
er i'v just got a 2liter mk3 bottom end an it has a oil breather on it next to the oil cooler  can i block it up ..??.is goin on my ev kjet enigne 8v !!
Logged

Offline Diamond Hell

  • Serious forum addict
  • *
  • Posts: 7,997
  • Opinions я Us
Re: breather on a 2liter
« Reply #1 on: 13 June 2009, 22:55 »
TSR do them, but make sure you're allowing the crank pressure out somewhere, or you'll start blowing seals, matron.
Logged
Just because you're offended doesn't make you right.

Holiday cottages on the Isle of Wight for 2-10 people? PM me.

Offline deanpompey

  • I live here
  • *****
  • Posts: 512
Re: breather on a 2liter
« Reply #2 on: 14 June 2009, 15:47 »
another way to do it is to extend the crank breather hose up to where the rocker breather is, and join them onto the GTI flying saucer with a t piece, then attach as normal to the inlet mani... much better if you ask me  :nerd:
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: breather on a 2liter
« Reply #3 on: 14 June 2009, 19:10 »
As above is the better way.
Logged

VeeDubGTI16v

  • Guest
Re: breather on a 2liter
« Reply #4 on: 14 June 2009, 19:25 »
or send them both to a catch tank/lucozade bottle
Logged

Offline bazzza

  • Not said much yet
  • **
  • Posts: 86
Re: breather on a 2liter
« Reply #5 on: 14 June 2009, 21:00 »
thanks... all so is the warm up valve just bolted to the blocks ie there's not a hole behind it just a case of movin it, an as 4 the fly wheel do i use my mk2 one with a mk3 clutch or a mk2 clutch? plannin to put it in next week ???
Logged
Pages: [1]
« previous next »